I've been looking around and can't find anywhaer to buy them or find any information on them. I also did a search here on h-t.com and didn't come up with anything that was helpful, pics and information would be great. I was also wondering what ITB's does Skunk2 run on their intergra

thanks in advance

 

I use TWM ITB's on my car, but i wouldnt buy them unless you had at lest 13:1. they cost about $2200 with injectets,fuel rail,fuel reg,lingage,and tps senser. I think there the best for the money.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by LSiTurbo &raquo;</TD></TR><TR><TD CLASS="quote">I use TWM ITB's on my car</TD></TR></TABLE>

TWM

 

get custom..i forgot..but there was a post that SGT & importreview made about some custom ITB'S

 

twm
i have a friend that is trying to sell a new set never used $1800

 

i'm running twm. got them for arround 1k pre owned but never used. there great. never had a problom with them. i have 8.9:1 compresion and they are fine. they love big cams too.

check out http://www.twminduction.com

good luck man

i know of a guy running cbr throttle bodies with a home made manifold too and he likes them.

 

8.9:1 with ITB's?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by LSiTurbo &raquo;</TD></TR><TR><TD CLASS="quote">8.9:1 with ITB's? </TD></TR></TABLE>

just waiting for rod bolts and bearings, soon to be 12:1

ps: with 8.9 it still rips.

 

https://honda-tech.com/zerothread?id=514464

 

we use TWM

 

SKUNK2 uses TWM as well. 2000series 50mm.

 

twms for me. 1250 used

 

thanks guys

 

If I ever make the switch to ITB's, it's definately going to be the haywards.

Suprdave

 

Dual carbs for me...I keep it simple! Cheap and powerful.

 

i used to rock the side drafts, had to move up to itb's. they where fast as hell but for my daily driver i had to go back to fuel injection. weber / micunis

 

I use twm
I also have access to the toda kit but it's too expensive

 

Cute timing belt.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mr Milano &raquo;</TD></TR><TR><TD CLASS="quote">Cute timing belt. </TD></TR></TABLE>


hahaha

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mr Milano &raquo;</TD></TR><TR><TD CLASS="quote">Cute timing belt. </TD></TR></TABLE>
The timing belt may be pink, but that is one clean looking motor. mschvs: has that thing been dynoed? And has anybody run the Toda ITB's? I am looking to run ITB's next year, and I have not decided between the TWM and the Toda's yet.

 

Anybody seen/used the new ITB from Weber?

 

carbs

 

We made our own using a set of motorcycle throttle bodies from hilborn 49mm and it worked great. As bisi stated as cheap as possible is also good we paid only $700.00 for the set !!!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by AZFAB &raquo;</TD></TR><TR><TD CLASS="quote">We made our own using a set of motorcycle throttle bodies from hilborn 49mm and it worked great. As bisi stated as cheap as possible is also good we paid only $700.00 for the set !!!</TD></TR></TABLE>

Got any pics?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Proelite103 &raquo;</TD></TR><TR><TD CLASS="quote">

Got any pics?
</TD></TR></TABLE>

some pics I took of the AZFAB car at IDRC


sorry there so big