anybody have pics of a itr muffler on a hatchback.. thnx in advance guys

 

yes, please do post up a pic!! i was thinkin of going that direction too. but the only problem is...isn't the ITR muffler too big?

 

They dont fit, I asked about this a while back. But if anythings changed i'd like to know too

 

wouldnt fit on my friends ek

 

CTR exhaust should fit. It's much shorter, and I believe they look about the same.

 

im tired of these posts lolol the Integra Type R Muffler does fit on the 92-95 Hatches and the 96-00 hatches...the piping doesnt fit u get the muffler...get custom piping...and when it goes on the hatch ur supposed 2 cut the end of the muffler alittle bit because its sticks out

 

my friend has it on his teal EG...and im gunna find the pic wit it on a EK

 

wut do we have here

 

sorry for being such a post ***** but lemme continue finishin my homework and find the Ek pic while im at it

 

sorry.... but that looks like ****! i wouldnt have just CUT the tip.... most ppl usually cut it straight off the muffler.... and reweld the chrome outter tip directly onto the muffler, and actually make the chrome tip a tad shorter.... it looks real clean. if possible. i'll look for a pic. user "eg cookiemonster" has an itr muffler on his car. i only got a glance at it one night as he was driving through a parking lot, but it looked REAL CLEAN!

 

so the tip on the red hatch was cut??

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SCo77iDAwG &raquo;</TD></TR><TR><TD CLASS="quote">so the tip on the red hatch was cut??</TD></TR></TABLE>

You can't tell???

 

that guy jus did a bad job wit cuttin the muffler part...when cut perfectly it looks exactly like stock but he jus messed up a lil bit but that a idea of how it fits...and to clearify the point dat the ITR muffler does fit on a Hatch thats jus the point i was tryna make

 

but everyone who puts this exhaust on a Hatch usually cuts the tip a tad because it sticks out way to much

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by t0p_sh0tta &raquo;</TD></TR><TR><TD CLASS="quote">

You can't tell???</TD></TR></TABLE>

the resolution on my screen is not so great. everything that i see is dark. wat could i expect from a pentium 1/ 16mb piece of old school aptiva ibm computer..

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JdmHybrid. &raquo;</TD></TR><TR><TD CLASS="quote">wut do we have here


</TD></TR></TABLE>

how does that sound with the ITR muffler???? quiet still???

 

yea very quiet but when vtec hits loud as hell sounds even better if u have a intake n der

 

they are extremely tight and not worth the trouble IMO, i wish it would fit though. by the way, i have and itr exhaust f/s

 

ill take pix of mine when my sister comes back tonite with her dig. camera

 

is the itr muffler 2.5" all the way ?

 

Here's some pix of my car (red EG) with and ITR muffler and my brother's car with one too.









And this is wat one of my friends, that is a girl, likes best on my car

 

the ITR muffler will fit! you just have to take it to a muffler shop with your car and have them cut the axle section flare one end the proper amount insert the ends togather and weld back. then they have to put n knew hangers and that's pretty much it the tip will stick out but you could have a shop do a shorter versin for you.

 

y go just type r...i have a s2000 muffler on my sol.... damn it i cant find a pic of it

 

I don't have a hb but the itr muffler bolts up onto my 95 civic coupe without any issues.

 

looks good...