Can people list their ZC CRX times and what mods they have? N/A preffered.

Thanks Homeslices!

 

with an intake and 92 dx header with 2.5" ex piping with a aftermarket muffler and a underdive pulley and act 6 puck and lightweight flywheel i ran 14.4 and 99mph and with a 50 shot of nos i ran 13.2 at a 110

 

15.62@88mph

at sacramento raceway

mods:

89integra 5 spd ecu
90 crx si tranny
exedy organic racing clutch
homemade cold air intake
stock crx si exhaust system
steelies with cheap firestone tires at 22psi
striped rear panels

 

I ran a 9.90 in the 1/8th the first time at the track. I had i/h/e, and clutch. I think I could of gotten a 9.8 with another run.

 

i run a 15.34@89.74 a zc with i/e and a chipped ecu, still on dx tranny

 

i have a 91 hb i ran 15.3@91 with i/h/e/clutch/si tranny and 89 teg ecu.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MONSTERZC &raquo;</TD></TR><TR><TD CLASS="quote">with an intake and 92 dx header with 2.5" ex piping with a aftermarket muffler and a underdive pulley and act 6 puck and lightweight flywheel i ran 14.4 and 99mph and with a 50 shot of nos i ran 13.2 at a 110</TD></TR></TABLE>

Notice any difference when you put th UD pulleys on?

Good times everyone, keep em comin.

 

I came out with a 15.5 at 92mph

mods are
mild P&P TB
stage 1 clutch
2.25 catback
shortram
msd ignition
pg7 Ecu
2 degree timing advance


I want to break the 15's this summer N/A b4 the rebuild and boost

pps..I'm a hella crappy driver too!

 

Check the Sig

 

14.6 @99mph is about my average.

ZC trans w/ burnt stock clutch, AEM CAI, DC header, Thermal R&D catback, 15" drag radials, PG7 ecu, some other smalls things... In 89 std hatch with a gallon of gas and no spare tire.

 

when i had my zc 3 years ago, i ran a 15.4

 

i gained 3 hp and 2 tq and it made me rev faster i was happy with the mod the ud pulley was free