Hi guys, i'm just now joining the dark side. All motor hondas just don't go fast enough on my budget and altitude. We're putting a b17a in my wife's 90 EF within a month or two, and I picked up a 14b and a 3000GT SMIC for $60 from a friend. The turbo is in great shape, no shaft play and from a low mileage car. I don't want to have a ghetto manifold made by an exhaust shop around town, I want one that is nice and done right, but I haven't heard of any b series manifolds that you can use the mitsu turbos with.

 

if you want a name-brand manifold, you have a few options. You could either buy one for a t3 turbo(which they make plenty of) and chop off the flange, and weld on a 14b flange.... or you can take some steel, drill some holes, and bolt one side to the t3 manifold, and use the other holes to bolt on the 14b. Im having Tinker219 just make me a custom manifold, for only 200 bones. Not a bad deal, and it works good, just a heads up. Good Luck

 

looks like custom is the way i'll have to go, unless I want to pay SFP a boat load to do a tubular SS mani, which is not happening. $200 is more my budget than $600.

 

Yea Tinker219 can probably make you a manifold for just about any flange.