F/S or WTT 2 DR GSR for 4 DR GSR
Thread Starter
Honda-Tech Member
Joined: Oct 2002
Posts: 467
Likes: 0
From: Ca, USA
F/S or WTT 2 DR GSR for 4 DR GSR
Im planning on selling my 96 GSR. Or i would like to Trade for a 94-97 GSR 4 dr. Plus Cash depending on condition.
Aim: Lisa Swtiepie
Email j_Spec_integra@yahoo.com
Location: Socal, Rosemead
Here are some more infor. on it.
Interior is Stock GSR Black.
Exterior Mods
Springs: Lower on Neuspeed Race in the front and cut ST in the rears.
Shocks: Tokico Illuminas on front and rears
Rims: 96 GS-R paint BBQ Black.
Hood: Black OEM hood. or your choice if you want a White One
Driver Side Mirror was broken by a Fight at a place and i found out that it broke when i came out. So i have one 98 Mirror on pass. and 94-97 on driver side.
Exhaust
Stock headers
Stock Cat
Thermal RD pipping
Stock GSR muffler
Headlights
Black housing.
Engine Mods are as follow
Intake is LS arm with a K & N filter can be changes to stock if wanted.
B18C1 Block
Stock GSR crank
IT-R Rods
JDM ITR Pistons
Stock GSR flywheel
All of this is balance to Take up to 10K in revs.
B18C5 Head
B16a2 cams
IT-R Valves
WEB valvetrain that can take up to 10K.
Stock GSR tranny
ECU = 96 ITR ECU.
Motor has about 5K Miles on it. Oil Change at least 6 times already.
This motor isnt crazy Fast but it was fast enough for me. I had Jun 3 in it but I decided to take it off and go back to stock.
The Flaws in the car are as follow
No Secondary O2 sensor because it was cut off because i was running OBD1 and had no use for it but when i went back to stock i didnt replace the Cat.
There is an Oil leak and i think its from the Rear Main seal. Or something to do with the Two tranny seals. If you do buy it i will provide you one from Honda. OR i can change it which will cost more.
Could use a New Oil Pan due to My brother running over a Rock. But there is no Oil leaking from there.
Check Engine light is on and is flashing 3 Codes, Two from The O2 Sensor and One from a Missing Teeth in the Crank pully. The one that OBD2a has teeth and OBD1 doesnt. If you run with OBD1 no Codes will be flashing.
I decided that i want a 4 Dr. now so im selling mines as Is. I dont want to put time into fixing all the problems. This car is daily driven To school and work. But if you would like me to fix all the problems then the price will be higher. but a few hundren thats about it. This car is a beauty to have and Fun to drive as you all know. I want a teg that has a lil more space thats why i want a 4 DR. But place make offer I bought the Car with 180K on it and took everything off to rebuild the motor. Its a Clean Title and Last Owner has been in a rear end Accident but was fix by the Dealer. Last Owner had a 3 pcs. spoiler on it that i took off and left a lot of holes. I can put back on the 3 pcs. if you would like. I can also raise the car's height back to stock also. I bought the car for 5000 and have invested about 3000 more into modding it. But i will let it go for the right price. Please no Low-Balling but all offers will be taken into consideration. OH, and all decals will be taken off. hehe. I fixed the bumper so it stays on better also. Will take more pics of it tomorrow.
Pics
Here are the rims it will be coming with.
Modified by 96 GSR BOY at 8:52 AM 5/21/2003
Aim: Lisa Swtiepie
Email j_Spec_integra@yahoo.com
Location: Socal, Rosemead
Here are some more infor. on it.
Interior is Stock GSR Black.
Exterior Mods
Springs: Lower on Neuspeed Race in the front and cut ST in the rears.
Shocks: Tokico Illuminas on front and rears
Rims: 96 GS-R paint BBQ Black.
Hood: Black OEM hood. or your choice if you want a White One
Driver Side Mirror was broken by a Fight at a place and i found out that it broke when i came out. So i have one 98 Mirror on pass. and 94-97 on driver side.
Exhaust
Stock headers
Stock Cat
Thermal RD pipping
Stock GSR muffler
Headlights
Black housing.
Engine Mods are as follow
Intake is LS arm with a K & N filter can be changes to stock if wanted.
B18C1 Block
Stock GSR crank
IT-R Rods
JDM ITR Pistons
Stock GSR flywheel
All of this is balance to Take up to 10K in revs.
B18C5 Head
B16a2 cams
IT-R Valves
WEB valvetrain that can take up to 10K.
Stock GSR tranny
ECU = 96 ITR ECU.
Motor has about 5K Miles on it. Oil Change at least 6 times already.
This motor isnt crazy Fast but it was fast enough for me. I had Jun 3 in it but I decided to take it off and go back to stock.
The Flaws in the car are as follow
No Secondary O2 sensor because it was cut off because i was running OBD1 and had no use for it but when i went back to stock i didnt replace the Cat.
There is an Oil leak and i think its from the Rear Main seal. Or something to do with the Two tranny seals. If you do buy it i will provide you one from Honda. OR i can change it which will cost more.
Could use a New Oil Pan due to My brother running over a Rock. But there is no Oil leaking from there.
Check Engine light is on and is flashing 3 Codes, Two from The O2 Sensor and One from a Missing Teeth in the Crank pully. The one that OBD2a has teeth and OBD1 doesnt. If you run with OBD1 no Codes will be flashing.
I decided that i want a 4 Dr. now so im selling mines as Is. I dont want to put time into fixing all the problems. This car is daily driven To school and work. But if you would like me to fix all the problems then the price will be higher. but a few hundren thats about it. This car is a beauty to have and Fun to drive as you all know. I want a teg that has a lil more space thats why i want a 4 DR. But place make offer I bought the Car with 180K on it and took everything off to rebuild the motor. Its a Clean Title and Last Owner has been in a rear end Accident but was fix by the Dealer. Last Owner had a 3 pcs. spoiler on it that i took off and left a lot of holes. I can put back on the 3 pcs. if you would like. I can also raise the car's height back to stock also. I bought the car for 5000 and have invested about 3000 more into modding it. But i will let it go for the right price. Please no Low-Balling but all offers will be taken into consideration. OH, and all decals will be taken off. hehe. I fixed the bumper so it stays on better also. Will take more pics of it tomorrow.
Pics
Here are the rims it will be coming with.
Modified by 96 GSR BOY at 8:52 AM 5/21/2003
Thread
Thread Starter
Forum
Replies
Last Post