fs: 99 ek o` doom
I might have to sell my EK so I can keep my truck as a tow vehicle. I`m seriously considering building a race car and would need something to get it to and from the track.
99 Civic DX
40k miles
Black
Exterior:
Repainted factory black by MOB less than a year ago
CF Hood
CTR Lights
CF Duckbill
SO Lip
Interior:
2 Black Sparco Torinos
Cusco 4-point Roll Bar
CTR Cluster
Tekniq Wheel w/ Quick Release Hub
Susp:
Neuspeed Coilovers (less than 200 miles)
CTR Rear Bar
Spoon F&R Strut tower Braces
Skunk2 Tie Bar (rear)
SPC Rear Camber Arms
SPC Rear LCA`s
SPC Front Upper Arms
Brakes:
11" Fastbrakes Wilwood Kit
11" Fastbrakes Rear Upgrade
Stainless Lines
EBC Pads
Wheels:
16" Blitz 01
Yokohama Parade Spec 2 w/ 300 miles
Motor:
This is where it gets interesting. This is not a rebuilt motor. It was purchased new from Honda and has a total of 1034 miles on it. It hasn`t even been tuned yet. Should make very good power. It gets tuned this week.
JRSC at 6lbs (w/ 8lb upgrade I`ll throw in)
84mm GSR w/ Golden Eagle Sleeves
JE Pistons
Eagle Rods
Fully Balanced Rotating Assembly
GSR Portflow Head w/ their springs
Golden Eagle Cam Gears
Golden Eagle Cam Seals
Golden Eagle Fuel Rail
GSR Cams
RC 440 Injectors
Hondata S200
Walbro Fuel Pump
Comptech Ice Box
DC JDM 4-1
2.5 Exh w/ Magnaflow Oval
ITR Trans
ACT Clutch
Koyo Radiator
HASport Mounts
Cometic Gasket
Assembled By Import Builders
Engine will be tuned next week by Hondata
16k takes it.
Ryan
99 Civic DX
40k miles
Black
Exterior:
Repainted factory black by MOB less than a year ago
CF Hood
CTR Lights
CF Duckbill
SO Lip
Interior:
2 Black Sparco Torinos
Cusco 4-point Roll Bar
CTR Cluster
Tekniq Wheel w/ Quick Release Hub
Susp:
Neuspeed Coilovers (less than 200 miles)
CTR Rear Bar
Spoon F&R Strut tower Braces
Skunk2 Tie Bar (rear)
SPC Rear Camber Arms
SPC Rear LCA`s
SPC Front Upper Arms
Brakes:
11" Fastbrakes Wilwood Kit
11" Fastbrakes Rear Upgrade
Stainless Lines
EBC Pads
Wheels:
16" Blitz 01
Yokohama Parade Spec 2 w/ 300 miles
Motor:
This is where it gets interesting. This is not a rebuilt motor. It was purchased new from Honda and has a total of 1034 miles on it. It hasn`t even been tuned yet. Should make very good power. It gets tuned this week.
JRSC at 6lbs (w/ 8lb upgrade I`ll throw in)
84mm GSR w/ Golden Eagle Sleeves
JE Pistons
Eagle Rods
Fully Balanced Rotating Assembly
GSR Portflow Head w/ their springs
Golden Eagle Cam Gears
Golden Eagle Cam Seals
Golden Eagle Fuel Rail
GSR Cams
RC 440 Injectors
Hondata S200
Walbro Fuel Pump
Comptech Ice Box
DC JDM 4-1
2.5 Exh w/ Magnaflow Oval
ITR Trans
ACT Clutch
Koyo Radiator
HASport Mounts
Cometic Gasket
Assembled By Import Builders
Engine will be tuned next week by Hondata
16k takes it.
Ryan
Joined: Dec 2001
Posts: 9,091
Likes: 28
From: the internet and I WILL STEP ON YOU
thats a very reasonable price for that beast
Ill give you $1.37, a stick of gum, a box of cracker jacks and a 20oz coke half-full to wash it down with for the red one
Ill give you $1.37, a stick of gum, a box of cracker jacks and a 20oz coke half-full to wash it down with for the red one
Trending Topics
Wow, that is very nice. I just wrecked my ITR and depending on how long it takes to get a check I might just have to take that off your hands. Let me know what the car dynos when you get it done.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vtecvoodoo »</TD></TR><TR><TD CLASS="quote">SO Lip</TD></TR></TABLE>
What's that? j/k.. Si lip, no?
What's that? j/k.. Si lip, no?
You gotta be shittin me man...
I was hoping you would do some sick things with that JRSC dood!
Bump for the lucky SOB who gets to take home a car with some sick potential...
We better see a dyno before it gets hauled off by the new owner
I was hoping you would do some sick things with that JRSC dood!

Bump for the lucky SOB who gets to take home a car with some sick potential...
We better see a dyno before it gets hauled off by the new owner






Dope car man