For Sale: Mugen header with 2.5" collector, 2.5" Carsound high flow cat and Mugen twinloop exhaust with a 2.5" midpipe. Complete exhaust from my 2000 ITR. The header was modified to 2.5" and then coated with the same heat coating used on piston tops by DART (see pic). The 2.5" Carsound Stainless steel car sound cat has 2 bung welded into it, one for O2 sensor and one for wideband o2 sensor use(dyno tuning). The Mugen twinloop has 2.5" stainless pipe running until the first bend over the axle (the resonator was removed, worth 5whp on the dyno). My Stock internals ITR motor made 185 whp and 135 lbft on an MD dyno with this exhaust sytem, AEM intake , camgears, VAFC, no ps or AC, Stock cams ECT.......

Picture of header.




I am building a DART tall deck, header will not fit new motor.

No winters/salt at all with exhaust system.

WILL NOT SEPERATE

Make offers via IM

Many referances here.

Mattj

 

nice setup...went all out.

 

mugen twin loop will not bolt onto a stock car right?

 

Normally yes, This was modified So it is 2.5" from header, to cat, to exhaust.

 

whoa, mugens!

 

bump for a good guy

 

is that header a 4-1 or 4-2-1 ?? How big are the Primaries ? Got any pics of where the modification was made ??

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by iLUVmySH &raquo;</TD></TR><TR><TD CLASS="quote">nice setup...went all out. </TD></TR></TABLE>

yup, even went for the mugen radiator cap.

 

Bump for Matt! Good seller

 

how much you asking for them?

 

check ur IM

 

I'm extremely interested in the exhaust if it's still available. Please let me know. Thanks.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ITR420 &raquo;</TD></TR><TR><TD CLASS="quote">I'm extremely interested in the exhaust if it's still available. Please let me know. Thanks.</TD></TR></TABLE> if u sell him the exhaust ill take the header and cat