Some Pics I never posted of my roll bar and harnesses.
05-05-2003, 12:50 PM
#1
Honda-Tech Member
Thread Starter
Some Pics I never posted of my roll bar and harnesses.
A while back Chris (Thanks Again) installed my AutoPower Roll Bar into my Type-R, but I never took pics of the final product. And just last week I got Five point Sparco's (only the four are in right now). So here are the pics.
Here is where the bars bolt to the floor.
Here is how far the roll bar is from the roof of the car
Here is a shot of where my speakers used to be.
Front shot of the camera mount.
Rear shot of the camera mount.
Two profile shots of the bar.
Rear shot of the bar.
and the harnesses.
Here is where the bars bolt to the floor.
Here is how far the roll bar is from the roof of the car
Here is a shot of where my speakers used to be.
Front shot of the camera mount.
Rear shot of the camera mount.
Two profile shots of the bar.
Rear shot of the bar.
and the harnesses.
05-05-2003, 12:56 PM
#3
Honda-Tech Member
Join Date: Jul 2002
Location: Weatherford, Texas
Posts: 1,806
Likes: 0
Received 0 Likes
on
0 Posts
Re: Some Pics I never posted of my roll bar and harnesses. (IGGY)
Damn that looks good. Do you race alot? The reason why I ask is because I was wondering the reason for keeping the back seats in. Looks really good though. 
needs some harnesses!!!
05-05-2003, 01:23 PM
#5
Honda-Tech Member
Thread Starter
Re: Some Pics I never posted of my roll bar and harnesses. (B2FiNiTY)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B2FiNiTY »</TD></TR><TR><TD CLASS="quote">Look good.
How do you like the sparco harness? How much do they cost? </TD></TR></TABLE>
I like them a lot, althought i have nothing to compair them to. they make a big difference on driving performace, i don't get slammed into the door. I got them for ~$190 shipped.
How do you like the sparco harness? How much do they cost? </TD></TR></TABLE>
I like them a lot, althought i have nothing to compair them to. they make a big difference on driving performace, i don't get slammed into the door. I got them for ~$190 shipped.
05-05-2003, 01:24 PM
#6
Honda-Tech Member
Thread Starter
Re: Some Pics I never posted of my roll bar and harnesses. (Mires)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mires »</TD></TR><TR><TD CLASS="quote">Damn that looks good. Do you race alot? The reason why I ask is because I was wondering the reason for keeping the back seats in. Looks really good though. </TD></TR></TABLE>
I don't track a lot, but I do Auto X. I have them in for looks so the car looks clean. Also removing the seats would put me into a different Auto X class.
</TD></TR></TABLE>I don't track a lot, but I do Auto X. I have them in for looks so the car looks clean. Also removing the seats would put me into a different Auto X class.
05-05-2003, 03:38 PM
#7
Member
Join Date: Nov 2001
Location: HT PRO POKER PLAYER IM FOR FREE STARTUP, MONEY
Posts: 7,842
Likes: 0
Received 0 Likes
on
0 Posts
Re: Some Pics I never posted of my roll bar and harnesses. (IGGY)
wondering how you like those harnesses as well. All you need now is the crotch strap and you are good to go 
Trending Topics
05-05-2003, 04:18 PM
#9
Honda-Tech Member
Join Date: Sep 2000
Location: Sears Point, CA
Posts: 5,276
Likes: 0
Received 0 Likes
on
0 Posts
Re: (P1mpSlap)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by P1mpSlap »</TD></TR><TR><TD CLASS="quote">Looks awesome.
I'm looking into one. Can you recommend a good place to purchase Autopower roll bars such as yours?</TD></TR></TABLE>
http://www.ioportracing.com
I'm looking into one. Can you recommend a good place to purchase Autopower roll bars such as yours?</TD></TR></TABLE>
http://www.ioportracing.com
05-05-2003, 04:25 PM
#10
I shoot brides
Re: Some Pics I never posted of my roll bar and harnesses. (George Knighton)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by George Knighton »</TD></TR><TR><TD CLASS="quote">Sorry to always be the Safety **** around here...but padding is a good idea.</TD></TR></TABLE>
someone has to be
but jeah, padding is def g00t idea
y
shi - who should just remove the rEEr v00 mirror since he can't sEE chit out the back anyway w/ the wing,padded roll bar, C pillar camera mount in the way LOL
someone has to be
but jeah, padding is def g00t idea y
shi - who should just remove the rEEr v00 mirror since he can't sEE chit out the back anyway w/ the wing,padded roll bar, C pillar camera mount in the way LOL
05-05-2003, 06:34 PM
#11
Honda-Tech Member
Thread Starter
Re: Some Pics I never posted of my roll bar and harnesses. (George Knighton)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by George Knighton »</TD></TR><TR><TD CLASS="quote">
I have the same setup in my car. Same rollbar, same harnesses.
Works great.
Just one thing: Padding? I doubt you can wear your harnesses on the street, and getting in a bad accident with your standard belts, the unpadded rollbar would be a liability.
Sorry to always be the Safety **** around here...but padding is a good idea.</TD></TR></TABLE>
I want to get padding but I want to re-coat my roll bar so it does not rust.
I have the same setup in my car. Same rollbar, same harnesses.
Works great.Just one thing: Padding?
I doubt you can wear your harnesses on the street, and getting in a bad accident with your standard belts, the unpadded rollbar would be a liability.Sorry to always be the Safety **** around here...but padding is a good idea.</TD></TR></TABLE>
I want to get padding but I want to re-coat my roll bar so it does not rust.
05-05-2003, 07:34 PM
#13
Honda-Tech Member
Join Date: May 2001
Location: Look up!
Posts: 10,980
Likes: 0
Received 0 Likes
on
0 Posts
Re: Some Pics I never posted of my roll bar and harnesses. (George Knighton)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by George Knighton »</TD></TR><TR><TD CLASS="quote">
I have the same setup in my car. Same rollbar, same harnesses. Works great.
Just one thing: Padding? I doubt you can wear your harnesses on the street, and getting in a bad accident with your standard belts, the unpadded rollbar would be a liability.
Sorry to always be the Safety **** around here...but padding is a good idea.</TD></TR></TABLE>
http://www.ogracing.com.........
7 3' sections of there roll bar padding covered almost all of my Autopower 4pt and have 1 section and a half left over! Padding is a great idea!
I have the same setup in my car. Same rollbar, same harnesses.
Works great.Just one thing: Padding?
I doubt you can wear your harnesses on the street, and getting in a bad accident with your standard belts, the unpadded rollbar would be a liability.Sorry to always be the Safety **** around here...but padding is a good idea.</TD></TR></TABLE>
http://www.ogracing.com.........
7 3' sections of there roll bar padding covered almost all of my Autopower 4pt and have 1 section and a half left over! Padding is a great idea!
05-05-2003, 07:49 PM
#15
Member
Join Date: Apr 2002
Location: Bay Area/SD, Ca, USA
Posts: 1,495
Likes: 0
Received 0 Likes
on
0 Posts
Re: Some Pics I never posted of my roll bar and harnesses. (Mike M)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mike M »</TD></TR><TR><TD CLASS="quote">Looks Good Iggy </TD></TR></TABLE>
indeed!
what seat are you gonna go with? did you find one that fit you ok?
</TD></TR></TABLE>indeed!
what seat are you gonna go with? did you find one that fit you ok?
05-05-2003, 08:02 PM
#17
Honda-Tech Member
Thread Starter
Re: Some Pics I never posted of my roll bar and harnesses. (EGSiX92)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EGSiX92 »</TD></TR><TR><TD CLASS="quote">cool is that a camera mount? where did you get that?</TD></TR></TABLE>
I got from IO port racing.
I got from IO port racing.
05-05-2003, 08:03 PM
#18
Honda-Tech Member
Thread Starter
Re: Some Pics I never posted of my roll bar and harnesses. (Mike M)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mike M »</TD></TR><TR><TD CLASS="quote">Looks Good Iggy </TD></TR></TABLE>
Thanks, I'll be hitting you up soon for a seat...
</TD></TR></TABLE>Thanks, I'll be hitting you up soon for a seat...
05-05-2003, 09:02 PM
#19
Founding Member
Join Date: Nov 2000
Location: Boston, MA, USA
Posts: 12,385
Likes: 0
Received 0 Likes
on
0 Posts
Re: Some Pics I never posted of my roll bar and harnesses. (IGGY)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by IGGY »</TD></TR><TR><TD CLASS="quote">
Thanks, I'll be hitting you up soon for a seat... </TD></TR></TABLE>
Why whatever seat would you order, I can only guess hehe
Thanks, I'll be hitting you up soon for a seat...
</TD></TR></TABLE>Why whatever seat would you order, I can only guess
hehe
05-05-2003, 11:01 PM
#23
Member
Join Date: Feb 2001
Location: redondo beach/irvine, ca, usa
Posts: 999
Likes: 0
Received 0 Likes
on
0 Posts
Re: Some Pics I never posted of my roll bar and harnesses. (George Knighton)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by George Knighton »</TD></TR><TR><TD CLASS="quote">
They're still in my car, if you want to see what I'm talking about.</TD></TR></TABLE>
I want to see. Do you have any pictures?
They're still in my car, if you want to see what I'm talking about.</TD></TR></TABLE>
I want to see. Do you have any pictures?
05-06-2003, 01:04 AM
#24
Honda-Tech Member
Thread Starter
Re: Some Pics I never posted of my roll bar and harnesses. (sa21199)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sa21199 »</TD></TR><TR><TD CLASS="quote">
I want to see. Do you have any pictures? </TD></TR></TABLE>
Ditto, I'm interested too.
I want to see. Do you have any pictures?
</TD></TR></TABLE>Ditto, I'm interested too.
05-06-2003, 02:47 AM
#25
Honda-Tech Member
Join Date: Oct 2001
Location: VA, USA
Posts: 1,697
Likes: 0
Received 0 Likes
on
0 Posts
Re: Some Pics I never posted of my roll bar and harnesses. (IGGY)
I retained my rear spealers as well. I did not have to break a mount off, but could only secure them with the front 2 mounting screws, but I haven't had any problems with them. I cut my speaker grills to fit in over the bar, and it looks OK. I'll try to get some pics up this week.