I was bored today. and before anyone comments... at best i am an amature at TIG welding sheet metal.









and yes, it's been leak tested... the ugly *** weld on the bung does not leak.

D

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by D &raquo;</TD></TR><TR><TD CLASS="quote">
</TD></TR></TABLE>

that dog rocks.

oh, and nice turkey **** welds

-Dave, who welds with turkey **** too.

 

My grandmother can weld better then that

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by AssPenny &raquo;</TD></TR><TR><TD CLASS="quote">My grandmother can weld better then that </TD></TR></TABLE>

then that? there's a before and after for that statement? hmm.

 

Craig, spelling AND grammer are sucking so bad for you now.

 

I'm going to learn to weld sometime this year - no matter what!!!

I've seen MUCH worse baffling done by so-called professional shops. Nice job Definitely worth doing since a Mugen pan is waaay too expensive for what you get.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Chris N &raquo;</TD></TR><TR><TD CLASS="quote">Craig, spelling AND grammer are sucking so bad for you now. </TD></TR></TABLE>

Dear sir, you have misspelled the word grammar while dissing someone's spelling.

 

j00 sure that dog didn't do the welding?

yshi - whose bEEn mEEning to do the same but will prolly end up buying a m00gin pan

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dawhiteboy &raquo;</TD></TR><TR><TD CLASS="quote">

Dear sir, you have misspelled the word grammar while dissing someone's spelling. </TD></TR></TABLE>

that was part of the fun, i knew i was missssspelling a word

plus, i don't think my 'are sucking so bad for you' statement is good grammar either.

 

D, send me a bung and that sheet metal already cut out and i'll do it to mine and show u what welds are really suppose to look like....

As for the grammar & spelling... U all can lick my hairy bean bag

 

looks nice.

what paint remover did you use? wire wheel?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Willard &raquo;</TD></TR><TR><TD CLASS="quote">what paint remover did you use? wire wheel?</TD></TR></TABLE>

bead blaster yo.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by D &raquo;</TD></TR><TR><TD CLASS="quote">bead blaster yo.</TD></TR></TABLE>

:load shortz:

 

ill give you $20 for that pan plus an extra pan and some sheet metal

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by baonest &raquo;</TD></TR><TR><TD CLASS="quote">ill give you $20 for that pan plus an extra pan and some sheet metal</TD></TR></TABLE>

um, no.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by D &raquo;</TD></TR><TR><TD CLASS="quote">

um, no.</TD></TR></TABLE> oh bummer

 

Nice! DIY!! rock

 

you should try a welding hood next time..
on the DIY

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by D &raquo;</TD></TR><TR><TD CLASS="quote">

</TD></TR></TABLE>

OMG!!! You have a Stewie dog too!!!!!
Here's my pooch Stewie










Sorry bout the OT I'm too excited to see another stewie dog

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MooFX &raquo;</TD></TR><TR><TD CLASS="quote">I'm too excited to see another stewie dog</TD></TR></TABLE>

stewie dog?

ours is mostly pit bull, part dalmation. :confused:

D

 

ok my bad, it looked like a stewie dog in the pic you took

stewie dog = jack russell

 

Sweet, something I was going to do, but never get around to...

 

sorry for being stupid but what exactly does that do

 

During heavy cornering (for long periods of time) it helps ensure that the oil pick has plenty of oil to supply to the engine.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by George Knighton &raquo;</TD></TR><TR><TD CLASS="quote">
(2)Can you duplicate your effort on a VTEC Prelude oil pan? Please? </TD></TR></TABLE>

KUSTOM lude pan...? we may be able to come to terms.

D