updated with the addition of:
"W"...real mugen mf8's! <--- mugens are on hold...
"X"...DA c-pillar bar! <--- fucken FLAKERS <IMG NAME="icon" SRC="https://honda-tech.com/forums/images/smilies/mad.gif" BORDER="0"> ! c-pillar bar is on hold
"Y"...2000-2001 DC2-R Spoon gauge cluster! <--- SIZOLD!
"Z"...DC2-R armrest eliminator w/ attachment bracket! <--- SOLD


cleaning out my garage...parts must go!

A) 99 jdm itr throttle body: SOLD

B) OG JG(jg stamped) 90-91 obd0 B-series LS/B16a 62mm throttle body - NO tps sensor otherwise, all obd0 b-series throttle bodies are the same(b18a/jdm b16a), excellent condition: SOLD

C) b18a/b18b/b20 NON-vtec JDM ultra 8mm red silicone wires - great condition: 70.shipped

D) 90-91 DA oem stock jasper green wing - excellent cond: 70.shipped

E) 90-91 DA wings west front and rear bumper covers (mugen style) professionally seam molded with new (when i installed) oem stock upper bumper cover halves - jasper green, front needs repainting, rear in great cond., front and rear-will not separate, BUMPER COVERS ONLY-no support beams and foam inserts: SOLD

F) 90-91 DA RS Akimoto polished aluminum intake pipe w/ blue rs akimoto/ K&N funnel ram 2 filter - needs repolishing with mothers, needs cleaning, so-so condition: SOLD

G) 90-93 old school DA aeroware mirrors (looks like spoon/vision) - paid 240 for these 5 years ago from an oldschool DA owner i knew from waayy back and never got to figure out how to install onto my own car...someone CAN/should figure these mirrors out-very easy but i'm too **** with my car and too lazy to do it, black, needs refinishing, get these out of my hands!: SOLD

H) 90-91 DA OEM stock radiator w/ stock cap - GREAT/excellent condition, no fans: 50/obo.pickup

I) 00-01 CTR cams - excellent condition, 3-4000 miles: SOLD

J) EF/DA Z-speed short shifter - excellent condition, silver:

K) 90-91 DA custom old school Dynomax ultra flow(polished long/oval body ) with real RSR invidia tip. comes with 2.25" ALL mandrel bent piping - muffler sits/welded straight and centered, polished rear section (muffler, piping, tip), small scuff on bottom of tip (cannot notice), VERY nice/beautiful/powerful custom exhaust system, i wouldn't sell this but i have a RSR exhaust now... : SOLD

L) 99 JDM ITR fuel rail - excellent condition, no fuel pressure regulator: SOLD

M) 99 ITR obd2 fuel injectors - excellent condition: SOLD

N) 99 ITR obd2 distributor - excellent condition, it's possible to convert to OBD1 spec's with the correct distributor plugs and a little repinning: SOLD

0) 90-93 DA b18a NON-vtec tranny CABLE - great condition, clutch cable only- not the transmission : 25.shipped

P) 90-91 DA JDM amber bumper lenses - will not sell until i get rid of my WW kit, buy the WW f&r kit off me and get these for 10bux: SOLD

Q) DA LS polished valve cover cut for exposed cam gears - blingbling: SOLD

R) 90-91 CHROME DA b18a oem stock exhaust manifold upper heat shield - blingbling, it's chrome YO! <IMG NAME="icon" SRC="https://honda-tech.com/forums/images/smilies/emexclaim.gif" BORDER="0"> , excellent condition, fits 90-91 DA stock exhaust manifolds ONLY: THROWN IN THE GARBAGE

S) 99 JDM ITR vtec solenoid w/out green pressure switch - jdm ITR's and CTR's vtec solenoids do NOT come with the green pressure switch because the switch is internal inside the ecu: SOLD

T) b-series old school RPS turbo clutch pressure plate (ribbed fingers ) - brand new in box, never used/installed, pressure plate only, no disc or other clutch accessories, rare and highly sought item: 200/obo.shipped

U) 90-91 DA b18a motor mounts - no front tranny mount, no mount plates-JUST mounts, used and in good/decent condition: THROWN IN THE GARBAGE

V) 90-93 DA JDM thin side mouldings - brand new in the boxes, has 1 fixable dent on ONE of the door mouldings from poor handling at the airport, easily fixable when painting the moulding, people that have seen these mouldings cannot even see the dent, it is a VERY small/light dent: SOLD

W) real MUGEN MF8's w/ falken ziex502 205/45/16 tires w/ 95-85% tread life. - EXCELLENT CONDITION!!!, like new, no curbage, w/ center caps, BRONZE: currently on hold

X) DA 90-93 integra C-Pillar bar - powder coated flat black, made by Ben Ogle (OgleSport) , excellent condition, felt a MAJOR improvement right from the start/installation : currently on hold

Y) RARE Spoon DC2-R gauge cluster w/ original spoon box/wrapping - 2000-2001 dc2's, very low kilometers, used for only 4months, EXCELLENT condition, did i mention rare and discontinued for a while now? : SOLD

Z) 94-2001 DC2 armrest eliminator w/ bracket - EXCELLENT condition, for those of you that have installed recaro's into your dc2's : SOLD


-parts with "obo" are negotiable but don't bend me over...
-parts with "shipped" after the price are the parts i'm WILLING to ship. the rest i'm hesitant to ship...
-pickup is best .
-those with "pending sale" can still get outbid, it basically goes down to whoever gets me the money FIRST!
-located in socal.
-more parts on the way....
-have pics on some of the parts, ask me...
-oh yeah, expletive SCAMMERS, FLAKERS, DREAMERS, and THEIVES!!!
email me at: mugendaxsi@yahoo.com w/ offers and inquiries...or reply here...





Modified by mugenDAxsi at 12:56 AM 10/29/2007

 

bump for a homie

still sporting the recaros?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SoSoxGino &raquo;</TD></TR><TR><TD CLASS="quote">bump for a homie

still sporting the recaros?</TD></TR></TABLE>
whattup big dawg! yeah, i finally put those seats in...i'm loven'em!!! thnx for da bump.

 

you have im

 

bump for a beautiful DA...too bad im not anywhere close!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 92TegHatch &raquo;</TD></TR><TR><TD CLASS="quote">bump for a beautiful DA...too bad im not anywhere close!</TD></TR></TABLE>
thank you 92Teg...and yes, i do have some grey poupon . bump

 

...in the exact order.....bump

 

Grrrrrrrrr...........for momo......bump

 

few pics...

JG throttle body: for 1st gen B16A or 90-93 LS motors




Modified by the big ragu at 10:35 PM 5/4/2003

 

well lookie what we have here.......

 

bump

 

you got pm

 

bump for a great seller......

 

ayeeeeeeeeee...... i knew dat....i knew dat.....

 

bump it up.........dag

 

you got mail

 

to-da top!!!!

 

whatchoo talkin 'bout willis?!?!....

 

bump for a good seller

 

are you sure its 62mm..cause i heard jg only made 65mm..can i get a pic of the stamp?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by cleanEG &raquo;</TD></TR><TR><TD CLASS="quote">bump for a good seller </TD></TR></TABLE>
thanks for the bump! i heard your project is in the works, right now...good luck and let me know if you need any help.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by unstopabledj &raquo;</TD></TR><TR><TD CLASS="quote">are you sure its 62mm..cause i heard jg only made 65mm..can i get a pic of the stamp?</TD></TR></TABLE>
yes, i'm sure the JG TB is 62mm at the intake manifold end. i measured it myself 4x's. the intake pipe end of the JG TB is 68mm. so the JG TB actually TAPERS from 68mm-62mm. The STOCK 99 JDM ITR tapers from 66mm-63mm. my NEW SPOON TB tapers from 70-63mm. all these are circumfrence diameter measurements from air filter side (to) the intake manifold side. END to END.

 

The project is coming along really well....still working on cleaning up the tranny and next step is sending out some more parts to get chromed/polished ---ones that I am too lazy to do myself You and your bro should drop by the house sometime to check it out......up to the top now

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mugenDAxsi &raquo;</TD></TR><TR><TD CLASS="quote">
thanks for the bump! i heard your project is in the works, right now...good luck and let me know if you need any help.


yes, i'm sure the JG TB is 62mm at the intake manifold end. i measured it myself 4x's. the intake pipe end of the JG TB is 68mm. so the JG TB actually TAPERS from 68mm-62mm. The STOCK 99 JDM ITR tapers from 66mm-63mm. my NEW SPOON TB tapers from 70-63mm. all these are circumfrence diameter measurements from air filter side (to) the intake manifold side. END to END. </TD></TR></TABLE>

alright thanks for clearing that up for me..so how much do you want for it? and do you have a pic of it where the stamp JG is at?

 

pm'ed you!

 

updated...selling my beloved mf8's . bump