Hello Everyone,

I have a few extra QTEC30 3" Quick Time Electric Cutout Valves that I was going to use, but now need to get rid of. I need to sell these ASAP. I will accept Money Orders, Cashiers Checks, and Paypal. If you are paying with a Money Order or Cashiers Check they will be $150. If you are paying with PayPal, then it will be $160. Shipping is FREE through UPS ground with insurance and tracking number. Let me know if you have any questions. Check out Quick Times website for more details.

http://www.quicktimeperformance.com/qtec.htm


Modified by EF8_Fan at 10:54 AM 6/13/2003


Modified by EF8_Fan at 12:26 AM 7/22/2003

 

good seller

Nice price and no waiting for QT to fill the back order

 

Does that come with the 3" pipe aswell or is that just the cutout? I saw the link and it shows the pipe, just wondering. Very nice price BTW

 

This is just for the cutout. This does not include the Y pipe because the Y pipe that is included with the qtec does not fit on the hondas or acuras. A muffler shop will be able to make you a y pipe that will work.

 

sounds kew. so how would it be bolted on??

 

you have mail at HondaPartz@yahoo.com
my email name is Karl Jacques
waiting for you reply
Karl

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by egturbo &raquo;</TD></TR><TR><TD CLASS="quote">sounds kew. so how would it be bolted on??</TD></TR></TABLE>

it bolts onto a y pipe, check out this link for more details. http://www.quicktimeperformance.com/qtec.htm

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EF8_Fan &raquo;</TD></TR><TR><TD CLASS="quote">

You've got </TD></TR></TABLE>

didn't recieve it
kjacques40@hotmail.com

 

i wish I had a turbo kit right now so i could get one

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EF8_Fan &raquo;</TD></TR><TR><TD CLASS="quote">

I sent it again. let me know if you recieved it</TD></TR></TABLE>
no, didn't recieve it....
pm me the info or try karl.jacques@hec.ca
but I think it's your email that can't send cause I'm recieving emails from other people...
let me know
karl

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by bcause &raquo;</TD></TR><TR><TD CLASS="quote">
no, didn't recieve it....
pm me the info or try karl.jacques@hec.ca
but I think it's your email that can't send cause I'm recieving emails from other people...
let me know
karl</TD></TR></TABLE>

I emailed you again at both address and I also sent you an IM, let me know if you got em.

 

got it at karl.jacques@hec.ca so we will work with this one
and you got mail


Modified by bcause at 4:00 PM 4/29/2003

 

bump

 

does it come with the switch
if not , how hard is it to wire the switch ?

thanks

 

yes it comes with the switch and everything you need to make it work.

 

anymore left?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by WuShu &raquo;</TD></TR><TR><TD CLASS="quote">anymore left?</TD></TR></TABLE>

 

up

 

Well I got my cutout today and I measured it cause it looks small and its only 2.5", I thought you said they were 3". Let me know if you have any 3" cutouts or else I want to return this one.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B20LS-T &raquo;</TD></TR><TR><TD CLASS="quote">Well I got my cutout today and I measured it cause it looks small and its only 2.5", I thought you said they were 3". Let me know if you have any 3" cutouts or else I want to return this one.</TD></TR></TABLE>

What is the part number on your box? Mine says QTEC30.


I hope I got the right one. I have not opened it yet. I wonder if I should? EF8_FAN will you take it back if it is opened and the wrong size?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B20LS-T &raquo;</TD></TR><TR><TD CLASS="quote">Well I got my cutout today and I measured it cause it looks small and its only 2.5", I thought you said they were 3". Let me know if you have any 3" cutouts or else I want to return this one.</TD></TR></TABLE>

Yeah, when i got em they didnt look 3" either. I checked most of the boxes and they are all the same. I called Barry last night and left a message and then I called again and i just got off of the phone with Barry at QT and he said that they are the right ones. If you have any questions, feel free to contact him at 201-995-9933.

These are for 3" exhausts. you need a little smaller butterfly for it to open cause if you have a 3" butterfly then it cant open because its the same size as the piping, mainly because when it heats up, it expands and then if its the same size, it will get stuck. However, he said that he has run many tests on them, and using it is the same as running open header. If you would like to exchange it for a bigger one then give Barry a call and ask him because all I have are these made for 3".

 

Got mine today too

First thing I noticed is it didn't have a 3" opening...oh welll...it will still work.

Thanks EF8_fan!!!

 

Anyone got dyno charts using these? Any gains?

 

Are there any left EF8FAN?

If so PM me yur email and ill paypal you the money. Thanks.

 

Yes i have some left. pm sent