I just got these pics off my camera and figured I would post up for you guys to see. This is the Full-Race Equal Length street manifold. I had it jet coated locally by a company called Hot Shot. I also coated the rear housing on the Sc63 Precision Turbo. The motor is now in the car and I am breaking it in. Stay tuned for dyno results on The MotorMatrix/Gr Technologies Street Warrior!!!






Modified by MotorMatrix.com at 5:18 PM 5/24/2003

 

That's pretty!

 

that wastegate sticks out far, it going to clear the rad. ?
Whats was the price for the Jet Hot coating ? look nice!

 

reminds me of the Dodge logo

 

Whoa!

Beautiful.

 

yeah, that thing's nice.
tell us how it feels, Mike

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hulkhb &raquo;</TD></TR><TR><TD CLASS="quote">that wastegate sticks out far, it going to clear the rad. ?
Whats was the price for the Jet Hot coating ? look nice! </TD></TR></TABLE>

I have a C&R civic radiator so it fits fine. To jet coat that size manifold is 225.00

 

Wow...looks bitchin.

Sonny

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Sonny &raquo;</TD></TR><TR><TD CLASS="quote">
Wow...looks bitchin.

Sonny
</TD></TR></TABLE>

Thanks

 

Looks great! I have mine installed, but I havent gotten the time with school this semester to get my damn car running on the new block/tranny/turbo set-up. Its one thing after another that keeps me from completing my damn project. Good luck! Oh, what precision are you using?

 

thanks, I'm running the precision SC63.

 

Hey MotorMatrix
On your turbine housing did you just the outside done or both inside and outside done?
I am looking to get my turbo manifold and turbo housing done. But for the turbine housing it was sugguested to get only the outside coated.

 

man i should get coat my greddy manifold!
looks great

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Midwestrider &raquo;</TD></TR><TR><TD CLASS="quote">Hey MotorMatrix
On your turbine housing did you just the outside done or both inside and outside done?
I am looking to get my turbo manifold and turbo housing done. But for the turbine housing it was sugguested to get only the outside coated. </TD></TR></TABLE>

I did both the inside and outside. i was told that it will also help reduce the carbon buildup inside the housing. if it happened to peel off which it shouldnt it will only exit the exhaust.

 

Full-race is so gorgeous, as is jet hot, my friend justgot his Inlinepro manifold jet hotted, and its sexy too

 

Cool thanks..

 

 

looks very good, should haul *** !

 

Looks good mike!

 

Mike-

Thanks again for the cam seal, cant wait to get it! How much would coating a drag manifold and the turbo? What is the turnaround time?

thanks

 

how come u only have one different cam gear?

pics look sick

 

NIce Coatings Mike. Was it jsut a powdercoating and Anodizing place?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B18EG6 &raquo;</TD></TR><TR><TD CLASS="quote">Mike-

Thanks again for the cam seal, cant wait to get it! How much would coating a drag manifold and the turbo? What is the turnaround time?

thanks</TD></TR></TABLE>

I can get a drag manifold coated for 125.00 and the rear turbo housing for 100.00. it will take 2-3 days and will be back to you. It was done by a local shop that does only jet coating. no powder coating.

The cam gears stay at 0 on our turbo motors. i just had the AEM one on there cause we played with the exhaust cam a bit but I never took it off.

 

Mike, did you run a gasket b/w the turbo and mani? Some say its not necessay...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MotorMatrix.com &raquo;</TD></TR><TR><TD CLASS="quote">thanks, I'm running the precision SC63.</TD></TR></TABLE>

is sc63 bigger then sc61???

any specs on the motor, very nice