i have everything for my swap(b18a in a crx hf 88) what else do i need to do?
Thread Starter
Joined: Oct 2002
Posts: 75
Likes: 0
From: hebron, ohio, usa
i have everything for my swap(b18a in a crx hf 88) what else do i need to do?
i have a 88 hf crx and i am dropping a b18a in it i hae
r4,teg axles,teg intermediate,teg knuckles,shift linkage teg,mounts ,motor tranny,clutch,flywheel,pressure plate,manifolds,teg wire harness,and hf wire harness,what else do i need and what do i have to do to the wire harness i have to make it work!!
r4,teg axles,teg intermediate,teg knuckles,shift linkage teg,mounts ,motor tranny,clutch,flywheel,pressure plate,manifolds,teg wire harness,and hf wire harness,what else do i need and what do i have to do to the wire harness i have to make it work!!
Brrraaaap!
Joined: May 2002
Posts: 3,950
Likes: 3
From: AZ
Re: i have everything for my swap(b18a in a crx hf 88) what else do i need to do? (lilparsons)
your rad hoses (upper & lower) , thermostat, water pump t belt, alt belt & resurfaced flywheel.
Good Luck
Blaze
Good Luck
Blaze
Honda-Tech Member
Joined: Mar 2002
Posts: 1,419
Likes: 0
From: falls church VIRGINIA, usa VA
Re: i have everything for my swap(b18a in a crx hf 88) what else do i need to do? (lilparsons)
sounds good to me, got the rear mount bracket?
the teg harness isnt gonna work, i dont know much about the hf harness but if its the same as the si use that. i used the si harnes cuz the ls harness had an extra plug which couldnt be pluged in, or the si harnes had an extra plug i forget
the teg harness isnt gonna work, i dont know much about the hf harness but if its the same as the si use that. i used the si harnes cuz the ls harness had an extra plug which couldnt be pluged in, or the si harnes had an extra plug i forget
Thread
Thread Starter
Forum
Replies
Last Post
lemongreenhatch
Honda CRX / EF Civic (1988 - 1991)
10
Dec 12, 2004 10:11 PM
KevronsEG
Honda CRX / EF Civic (1988 - 1991)
9
Nov 20, 2003 07:57 AM