Well I've amassed a rather large pile of civic parts over the past month or so, however I need some input to make sure I'm not missing and 'little pieces' that I'll have to halt the install for , or hunt down at 3am. Heres the list of stuff:

96 Civic Hatch
-SRR LCA's
-ST Front and Rear Swaybars
-KYG Shocks
-Ground Control Coilovers
-Benen Lower Tie Bar
-Ground Control Upper Mounts

A camber kit will follow once I feel satisfied that I need one. Should I look into poly bushings or anything now that everything is getting ripped out?

 

I guess I dont need anything

 

i'd get new lca bolts at the honda dealer go spend the 15 bucks , just incase you snap one of them .

 

Definately a wise choice! Along w/ some anti-seize for the new bolts to be dipped in.

About the Bushings you don't necessarily NEED them, but if you don't mind spending the extra $$$ it will beneficial and easy since you already have the LCA's out.

Scott

 

Thanks guys, thats what I was looking for.

 

Be very, very carefull with your ST rear sway. Just surf around in this forum and you'll find tons of people who have ripped out their sub-frames because of the ST sway. Good luck though!! Post pics!!!!!