After doing some close comparison and research, I realized that the JDM integra fenderliners for the JDM spec front end are exactly the same as the USDM parts. There are 2 distinct differences though. Details are shown in the images below. The JDM and USDM are shown for comparison.

This first image is to allow the liner to clear the top edge of the bumper and to get the screwdriver in to mount the bumper. The USDM one is on the right.


This cut is made to allow the corner of the lower edge of the bumper to fit into the bumper easier. The USDM is on the right



[Modified by markpaco, 1:09 AM 3/10/2003]


Modified by markpaco at 6:41 PM 11/22/2006


Modified by markpaco at 6:42 PM 11/22/2006

 

Awesome information and pics!! This is great for anybody who is looking into getting the JDM front end (me!)

 

Great info, thanks for the heads up!

 

good info!
i am using the USDM fenders in my jdm front.. it kinda sags a little so i just shoved it in and ziptied it

 

Do you have pics?

 

i can take pics if you really want some.. i need to check underneath the car to see why there is a small oil leak after i did a valve adjustment
it kind of bunches up where the slit is on the JDM liner

 

pics are finally back up. woot!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by markpaco &raquo;</TD></TR><TR><TD CLASS="quote">pics are finally back up. woot!</TD></TR></TABLE>

Good thing, too. I think those people from three years ago were about to give up hope...

 

 

w/c is heavier? jdm front or usdm front?

 

Do you know of a place that sells the JDM fender liners? I need them because I have a JDM front end and the car didn't come with any fender liners at all. If I can't get a hold of the JDM fender liners, I can just use the USDM ones and customize them right?

 

bump for the man who is using the usdm rebar with the jdm front. very informative info

 

good to know

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by chars_dc2 &raquo;</TD></TR><TR><TD CLASS="quote">If I can't get a hold of the JDM fender liners, I can just use the USDM ones and customize them right?</TD></TR></TABLE>

Did you actually read this thread?

 

good info man!

yeah, i just modified mine to fit as well =P

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Padawan &raquo;</TD></TR><TR><TD CLASS="quote"> Did you actually read this thread? </TD></TR></TABLE>

roflcopter x2

 

good man, figures it out and then shares...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Liu Kang &raquo;</TD></TR><TR><TD CLASS="quote">good man, figures it out and then shares...</TD></TR></TABLE>

...then, next thing you know, 4 years go by...

 

lmao