Ok I have a 94 acura integra ls and have basic bolt on's and just orderd my zex nitrous kit. In the future I want to drop a H22A engine into my car so I thought I would start finding out some information about it. What type of things should I look for a swap to include. I have the basics like the engine,tranny,shift linkage,axels,ecu,and alternator but what else do I need. Also is there anyway I can keep my power steering and AC with this swap or does that have to go. What type of motor mounts should I buy for this swap. what would you expect the total cost to be for this swap to run right. and is it reliable. Any information would be appreciated. Thanks

 

hey man sorry to tell you but your probly gunna get about 0 help here. i asked about swiching from auto to manual and i got no replies

 

do the search man..this was like the main topic about 2 days ago

 

do you just need a list of parts or do you need wiring help?

 

a list of parts and wiring help

 

well you will need mounts, the full swap,a slim fan or trim your stock fan to clear the slave, injestor resistor box or 10 ohm resistors, and misc electrical connectors for extending the wires for a few sensors, you will have to add few wires for the vtec and a few other things. you will have to do a little cutting for the linkage, and will need the 90-93 accord jack shaft and 90-93 teg axles! any more questions or if I forgot something let me know