I'm looking at Precisions SC61. It will be going on a 2.0 b18c1. I'm looking for a turbo able to produce 500-550 whp. I see there is 2 differant sc61 that are t4/3's. What are the differances between the two?

 

the sc61 comes in a straight t4 configuration. i dont beleive they are building them t3/t4.

 

I was told they will be ready in 3 weeks. Motormatrix what turbo would you suggest? Which turbo are you running on your street car?

 

you can get a custom sc61 with t3 exhaust housing just have to request it..

 

yeah, the sc61 can be built in the smaller t3 housing. Viren was correct.

 

Look for the logo that signifies various components of this turbocharger have been updated with the latest Garrett GT aerodynamic technology.

what is the new technology featured on the sc61s? what is a is a t350 a specific t3 while the to4e is the specific t4 side? would this be a good turbo choice, either the t350 or to4e for around 250whp, with plans of using it to make 450whp later on?

 

The SC61 comes with a GT40 compressor wheel. It can come with a straigt T04 Turbine wheel or a T350 turbine wheel.

As far as the compressor, you have a choice of a T04S or a T04E compressor cover. The SC61 will replace the 60-1 turbo. You will see more Nissan guys running more 60-1 turbos since they are 2yrs. behind.

 

If you only want that power you dont need the SC61. I would recomend the SC44 or the SC34 for your goals.

art

 

how much do the SC61's cost?

Joe

 

they are 775 retial.

 

Yup.. I have one in stock too.

 

ya i just got mine back with the T04S housing on it it is a SC61 with a .68A/R T4 i love mine and there customer service is

 

what would you suggest the housing be for me on the sc61??

I have a 2.0 gsr block
9:1 je pistons 84 mm
crower connecting rods
darton sleeves 84 mm
holley 750cc injectors
hondata 3b
obdII-obdI converison harness
stock head
walbro 255 in tank
aem fpr

some moe stuff I just cant remember right now

i want to run 10-15 psi on the street and i want about 450-500whp for the track. Let me know what you think I should run.

 

anybody?? arturbo, motormatrix??

 

sc44 is what i would chooose.

 

how much whp can this turbo support and what is the efficiency range of this turbo?

 

the sc44 is a good street strip turbo!!!

 

Damn Art that is beautiful. I think I'll have to get one of those. BUt will it be a little overkill if I only want 500-550whp. Would the sc44 or another turbo be able to make that power and be more fun on the street?

 

i am shooting for 500-600+whp with one of them with the T04S housing and a .68A/R

 

Is that a T4.

 

yes boostfed's is a straight t4. you can get it t3/t4 also if you like.

 

im looking for the sc61 too whit the T3 flange look like no one has it in stock
b/o

 

not necessarily on b/o. just turbos come in so many different configurations for 1 particular turbo. the sc61 comes in like 10 possible configurations. its better to have it custom built to the customers specs in my opinion.

 

what is the comp housing made of on precision turbos..
looks like its powedery..or is that a coating of somesort?

 

That's just the grain in the aluminum casting you see.

Rod Short
Sales Manager
Precision Turbo