Head Bolt Torque specs.
Will you make something up for me please?
Joined: Sep 2001
Posts: 6,349
Likes: 0
From: SoCal
Re: Head Bolt Torque specs. (Four Door LS VTEC)
For stock head bolts....
(8.7 kgf.m, 63 ft-lbs) Apply motor oil to all threads first and top of washer.
Tighten them in this sequence. Imagine looking at motor from front of car. And reading bolts from left to right starting from intake side:
8, 4, 2, 6, 10 <---intake order
7, 3, 1, 5, 9 <---exhaust order
Hope that helped dude.
Torque them to 22ft-lbs first in that order. Then to 63ft-lbs in that order.
Good luck.
(8.7 kgf.m, 63 ft-lbs) Apply motor oil to all threads first and top of washer.
Tighten them in this sequence. Imagine looking at motor from front of car. And reading bolts from left to right starting from intake side:
8, 4, 2, 6, 10 <---intake order
7, 3, 1, 5, 9 <---exhaust order
Hope that helped dude.
Torque them to 22ft-lbs first in that order. Then to 63ft-lbs in that order.
Good luck.
Will you make something up for me please?
Joined: Sep 2001
Posts: 6,349
Likes: 0
From: SoCal
Re: Head Bolt Torque specs. (Four Door LS VTEC)
shamoo is right. almost. close enough. First you torque to 22 and then to 60. close enough. thanks a lot.
Thread
Thread Starter
Forum
Replies
Last Post
EG93si
Honda CRX / EF Civic (1988 - 1991)
0
Dec 30, 2005 06:16 PM
