Ok fellas... i need to know if anyone knows the best(easiest)way to make it fit...
I have the shift linkage from the DX that was on the car and i have the shift linkage from the b16..does anyone know which one is the best linkage to use???
I have a friend who is a weilder, so we are trying to find out if there is a definate amount of inches that need to be cut and what not??? i know it depends on the car...
any help that you can offer as to what linkage to use and the length would be appriceated...
i know hasport sells this linkage but i know that you guys have to know an easy solution to the issue...
thanx


[Modified by paybac4223, 2:41 PM 2/12/2003]

 

ttt

 

ttt
anyone???
someone has to know...

 

You have to use the b-series shift linkage. I dont know the exact length but you can just test it by bolting the one side of the linkage to the tranny and take measurements from there to make it fit.

 

thanks... so i'll use the b series linkage...now all i need to figure out is the sxact measurement in a 91 honda civic dx hatch