eg H22 swap
Senior Member
Joined: May 2001
Posts: 10,753
Likes: 1
From: Where snow is, I am.
Re: eg H22 swap (ItzTw)
You will need to get either accord or prelude shift linkage with shifter cables and cut in a 2x3 hole right underneath where your cup holders are (or it can be a little more forward).
for axles, you have several options:
prelude intermediate shaft with 90-93 integra passenger axle with Raxles custom axle (prelude inner cv joint, 90-93 integra shaft and outer joint).
OR
prelude intermediate shaft and DSS custom axles for H22 Civic. They have several different levels of axles handling a certain HP rate.
http://www.driveshaftshop.com
(I would strongly recommend this one).
OR
90 accord intermediate shaft with 90-93 integra axles on both sides.
(Most people use this combo as it's cheaper and OEM parts as well, but isn't as strong as the DSS combo).
HTH
for axles, you have several options:
prelude intermediate shaft with 90-93 integra passenger axle with Raxles custom axle (prelude inner cv joint, 90-93 integra shaft and outer joint).
OR
prelude intermediate shaft and DSS custom axles for H22 Civic. They have several different levels of axles handling a certain HP rate.
http://www.driveshaftshop.com
(I would strongly recommend this one).
OR
90 accord intermediate shaft with 90-93 integra axles on both sides.
(Most people use this combo as it's cheaper and OEM parts as well, but isn't as strong as the DSS combo).
HTH
Honda-Tech Member
Joined: Feb 2001
Posts: 3,775
Likes: 0
From: Mountain View
Re: eg H22 swap (ItzTw)
email jeff at info@hybridautomotive.com he just did this in his eg and he knows everything!
Honda-Tech Member
Joined: Apr 2000
Posts: 635
Likes: 0
From: Toronto, Canada
Re: eg H22 swap (poison)
Actaully for axles would it not depend on the kit being used? Or do all the mount kits place the motor in the same position? I remember when we used to do swaps for 88-91 Civic/CRX axle combination depended on the kit being used..
What kit are you using? We've used HCP in the past and have always used the 90-93 axle combination. For some reason the motor sits in a weird position and keeps on breaking the boots. 2 axles in 6 months... on the same side
We've switched over to another brand.. TOTEM and they look great quality wise and they sit the motor straight.
What kit are you using? We've used HCP in the past and have always used the 90-93 axle combination. For some reason the motor sits in a weird position and keeps on breaking the boots. 2 axles in 6 months... on the same side
We've switched over to another brand.. TOTEM and they look great quality wise and they sit the motor straight.
Joined: Mar 2002
Posts: 1,452
Likes: 0
From: New Orleans, Louisiana, USA
Re: eg H22 swap (ItzTw)
http://www.hcpengineering.com
http://www.jdmshit.com
1990-1991 accord manual intermediate shaft, 90 teg axles. Use the 89 teg passenger side if the car is slammed. I say go with the HCP mounts I have had personal experiance with them and I can vouch. The websites instructions were good, and there wasnt much to modify at all.
http://www.jdmshit.com
1990-1991 accord manual intermediate shaft, 90 teg axles. Use the 89 teg passenger side if the car is slammed. I say go with the HCP mounts I have had personal experiance with them and I can vouch. The websites instructions were good, and there wasnt much to modify at all.
Thread
Thread Starter
Forum
Replies
Last Post
