FS: Wilwood 4Piston Calipers!
Thread Starter
Honda-Tech Member
Joined: May 2000
Posts: 4,073
Likes: 1
From: The Dirty Hotness
FS: Wilwood 4Piston Calipers!
NOW ON EBAY!
http://cgi.ebay.com/ebaymotors...27955
I have a set of Dynalite Wilwood calipers that I would like to sell. They have brackets that are made to fit onto GS-Rs/DC2s. I believe they will work with all Civics so long as you have the 10inch. disc up front.
They were originally bought from Ryane Motorsports and they were made specifically to fit the Integras.
I AM 100% sure however, they work with GS-Rs since they were last mounted on the C-SpeedRacing Integra for the Import ShowOff in Vancouver.
Since they were never intended to be used otherwise (The car which belongs to G3-TEG now runs on NSX footwear) they were removed immediately afterwards.
The brake pads are worn basically down to the back plates. This was NOT done by us but the previous owner who used them ONLY for the street. The last owner was Benjamin Tang who use to frequent this board before he sold his ITR about a year ago.
The bubbling you see was just black paint (hammerite) we used to make the calipers more stealthy, but unfortuantely we didn't realize brake fluid acts like hammerite solvent. They are silver underneath and otherwise in perfect working condition other than being bit dirty.
Make me an offer!
Modified by RagingAngel at 5:52 PM 12/3/2003
Modified by RagingAngel at 5:53 PM 12/3/2003
http://cgi.ebay.com/ebaymotors...27955
I have a set of Dynalite Wilwood calipers that I would like to sell. They have brackets that are made to fit onto GS-Rs/DC2s. I believe they will work with all Civics so long as you have the 10inch. disc up front.
They were originally bought from Ryane Motorsports and they were made specifically to fit the Integras.
I AM 100% sure however, they work with GS-Rs since they were last mounted on the C-SpeedRacing Integra for the Import ShowOff in Vancouver.
Since they were never intended to be used otherwise (The car which belongs to G3-TEG now runs on NSX footwear) they were removed immediately afterwards.
The brake pads are worn basically down to the back plates. This was NOT done by us but the previous owner who used them ONLY for the street. The last owner was Benjamin Tang who use to frequent this board before he sold his ITR about a year ago.
The bubbling you see was just black paint (hammerite) we used to make the calipers more stealthy, but unfortuantely we didn't realize brake fluid acts like hammerite solvent. They are silver underneath and otherwise in perfect working condition other than being bit dirty.
Make me an offer!
Modified by RagingAngel at 5:52 PM 12/3/2003
Modified by RagingAngel at 5:53 PM 12/3/2003
Thread Starter
Honda-Tech Member
Joined: May 2000
Posts: 4,073
Likes: 1
From: The Dirty Hotness
Re: FS: Wilwood 4Piston Calipers! (b16civict)
yes I will ship!
I have offers at 500CAD right now...but money talks....
check http://www.xe.com for approximate currency conversions!
I have offers at 500CAD right now...but money talks....
check http://www.xe.com for approximate currency conversions!
Trending Topics
Thread Starter
Honda-Tech Member
Joined: May 2000
Posts: 4,073
Likes: 1
From: The Dirty Hotness
Re: FS: Wilwood 4Piston Calipers! (RagingAngel)
I swear...nobody likes brakes....!
I keep on getting offers but nobody takes em!
latest one is at 550CAD + ship. Guys don't flake..I'm a great buyer and an equally good seller!
I keep on getting offers but nobody takes em!
latest one is at 550CAD + ship. Guys don't flake..I'm a great buyer and an equally good seller!
WOoo WooOOOOoo!
Thread Starter
Honda-Tech Member
Joined: May 2000
Posts: 4,073
Likes: 1
From: The Dirty Hotness
Re: FS: Wilwood 4Piston Calipers! (ILOVEGIRLS)
I'm quite certain they will fit on the ITR...
To make them fit...you'll need an AN fitting and mod the brake hose.
Up Up and away!
To make them fit...you'll need an AN fitting and mod the brake hose.
Up Up and away!
Junior Member
Joined: Aug 2002
Posts: 209
Likes: 0
From: Roanoke, Virginia, USA
Re: FS: Wilwood 4Piston Calipers! (RagingAngel)
id hate to tell you but.. the reason why nobody is interested is becasue you can get them from summit racing BRAND NEW for $120.00 each and they offer FREE SHIPPING
and those brackets can be had for 10.00 if your creative!
you can view them here
http://store.summitracing.com/partdetail.asp?part+27489
[Modified by scottg, 6:53 PM 2/10/2003]
and those brackets can be had for 10.00 if your creative!
you can view them here
http://store.summitracing.com/partdetail.asp?part+27489
[Modified by scottg, 6:53 PM 2/10/2003]
Thread Starter
Honda-Tech Member
Joined: May 2000
Posts: 4,073
Likes: 1
From: The Dirty Hotness
Re: FS: Wilwood 4Piston Calipers! (scottg)
id hate to tell you but.. the reason why nobody is interested is becasue you can get them from summit racing BRAND NEW for $120.00 each and they offer FREE SHIPPING
and those brackets can be had for 10.00 if your creative!
you can view them here
http://store.summitracing.com/partdetail.asp?part+27489
[Modified by scottg, 6:53 PM 2/10/2003]
and those brackets can be had for 10.00 if your creative!
you can view them here
http://store.summitracing.com/partdetail.asp?part+27489
[Modified by scottg, 6:53 PM 2/10/2003]
somebody make me an offer....
