Who here needs anything from Tial? I'm doing a GB for all tial products. Post here what you need or IM me. Either way, the price will be right for you.

35mm Wastegate - .3, .45, .65, .8 bar spring (Silver only)- $226 shipped.

35mmxHP Wastegate - 3, .45, .65, .8, .95, 1.1, 1.35, 1.5 bar spring (Gray, Red, blue, Purple,Black) - $246 shipped.

40mm Wastegate - .25, .4, .6, .8, .9, 1.0 bar (Gray, Red, Blue, Purple,Black) - $ 365 shipped.

46mm WG- (Gray, Red, Blue, Purple,Black) color 495 shipped

Bov - (Red, Blue, Gray, Purple, Polished,Black) $210 shipped.

Who's interested ? Either post here for email me , or HT IM.


Thanks

[Modified by ekb18c, 2:51 PM 1/17/2003]


[Modified by ekb18c, 5:30 AM 1/18/2003]


[Modified by ekb18c, 5:37 AM 1/18/2003]


[Modified by ekb18c, 2:32 PM 2/3/2003]



[Modified by ekb18c, 6:13 PM 2/6/2003]

 

Does the bov come with your choice of flange and its a complete kit?







[Modified by J2turbo21, 8:32 AM 1/26/2003]

 

I might be interested in a BOV in black or grey

 

Yes, your choice of flange.

 

Colin, Ive seen some tial products in black. Can you get them in black?

art

 

Art,

Yes, I can get them in black but they may not be in stock all the time though.
If you need black, I can have it in 3 days.


[Modified by ekb18c, 9:10 AM 1/19/2003]

 

Nobody wants Tial bovs or Wastegates?

 

Im interested in a bov in red,grey or black with a steel flange.I wont know til sometime this week if i could get it or not.

 

Just let me know.

 

Good prices. Wish I had a black one

 

You can if you want one..

 

Do you know the size of the threads for the vac fitting on the tial wastegate?

 

No, I don't know it off hand. I'll check for you and IM you back.

 

I would get one if I needed 2. When my car gets stolen for the first time I'll come to you for a black one.

 

Does it include both the inlet and outlet flange or just the outlet?

 

No, it doesnt include the flanges. Flanges are only a couple of bucks more.

 

Thank you, please keep me updated

 

would you list a recomeended size? in other words- how much power would you suggest having before stepping up to the 46mm?

 

What kind of power are you pushing, and I'll tell you what wastegate would benefit you more. 46mm wastegate is for big hp anythign over 400whp, however you can get away with using the 40mmxhp wastegate.

The most common wastegate is the 35mm wastegate.

HTH

 

well see, here's my problem- I'm building for big power... but at the same time, im going to crank it down and be streetable.

im getting a full sleeved block, the whole 9.
low boost, i want 10 psi
high boost, im going to be up in the 20s
400 horse- yeah around there... but at the same time, i need to be able to turn it down.

 

46mm with a .7 bar spring should do the trick.

HTH

 

thanks what i was thinking too... but a couple people said to get the 40mm... so i'm a little confused about it

 

You can go with the 40mm too.

Both will do the job, but the 40mm is cheaper.

Some people say that the 46mm isnt good at all, however I have used the 46mm and when i turn off my boost controller it hold the boost to what my spring is.

Let me know what you decide.

 

awesome prices, did you ever figure out what the thread pitch is? I tried 1/8, 1/4, and 3AN and none of them fit

 

i do believe it's a 1/4