Ericks Racing T.B. vs stock ITR T.B.
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2002
Location: Southern California, U.S.A.
Posts: 9,854
Likes: 0
Received 4 Likes
on
4 Posts
Ericks Racing T.B. vs stock ITR T.B.
I am getting ready to dyno (again) and I swapped out my Erick's Racing throttle body for my stock ITR throttle body. My butt dyno tells me that there is a world of difference between the two. Throttle response and top end power seem to have dropped significantly. I am going to dyno with both throttle bodies, so I will have hard evidence to prove one way or the other, which one makes more power. At least on my setup. I will post results when I get them.
#3
Trial User
Join Date: Feb 2000
Location: right near da beach, ....boy
Posts: 3,063
Likes: 0
Received 0 Likes
on
0 Posts
Re: Ericks Racing T.B. vs stock ITR T.B. (b19coupe)
thats funny. a friend of mine who has a 2l motor gained about 5hp on the top with the ericks tb
my 1.8 lost some low but didnt make or loose anything up top
my 1.8 lost some low but didnt make or loose anything up top
#4
Honda-Tech Member
Join Date: Jun 2000
Location: Queens, NYC
Posts: 2,577
Likes: 0
Received 0 Likes
on
0 Posts
Re: Ericks Racing T.B. vs stock ITR T.B. (BustaNutt-616)
thats funny. a friend of mine who has a 2l motor gained about 5hp on the top with the ericks tb
my 1.8 lost some low but didnt make or loose anything up top
my 1.8 lost some low but didnt make or loose anything up top
i'm curious to know the results as well.
#6
Honda-Tech Member
Thread Starter
Join Date: Mar 2002
Location: Southern California, U.S.A.
Posts: 9,854
Likes: 0
Received 4 Likes
on
4 Posts
Re: Ericks Racing T.B. vs stock ITR T.B. (TypeOne Enjoy It)
where are you dynoing?
[Modified by b19coupe, 8:01 PM 1/13/2003]
Trending Topics
#8
Honda-Tech Member
iTrader: (2)
Join Date: Mar 2002
Location: Woodbridge, NJ, Middlesex
Posts: 5,828
Likes: 0
Received 1 Like
on
1 Post
Re: Ericks Racing T.B. vs stock ITR T.B. (b19coupe)
where are you dynoing?
Import Builders.
Import Builders.
greg
#11
Honda-Tech Member
Join Date: Jul 2002
Location: ORANGE COUNTY CALIFORNIA, US
Posts: 1,669
Likes: 0
Received 0 Likes
on
0 Posts
Re: Ericks Racing T.B. vs stock ITR T.B. (b19coupe)
I have a 70mm too. I'll stop by. Now I need to talk Jerry into comparing his itb's to a big mani/tb combo.
#16
Junior Member
Join Date: Jul 2002
Location: Everywhere
Posts: 602
Likes: 0
Received 0 Likes
on
0 Posts
Re: Ericks Racing T.B. vs stock ITR T.B. (b19coupe)
Erick's Racing 70mm tapering to 68mm. Stock ITR intake manifold port matched to the throttle body.
I have been looking for one for a couple weeks now, and no one seems to have any.
Thanks.
#17
Honda-Tech Member
Re: Ericks Racing T.B. vs stock ITR T.B. (All Motor Rex)
I saw one that looks identical to that one. It had the number 68 stamped on it but the opening was 70mm. It was manufactured by RPM Engineering. Not sure if that was the name of the manufacturer or what.
#19
Honda-Tech Member
Join Date: Aug 2002
Location: JDM ricer land, CA
Posts: 2,901
Likes: 0
Received 0 Likes
on
0 Posts
Re: Ericks Racing T.B. vs stock ITR T.B. (All Motor Rex)
Anyone have any idea's on who may have one in stock, besides Erick's racing? (So. Cal Preferred) Apparently Erick is on vacation, and the shop is closed for a week or so.
I have been looking for one for a couple weeks now, and no one seems to have any.
Thanks.
I have been looking for one for a couple weeks now, and no one seems to have any.
Thanks.
from what ive seen, the rpm eng, erick's, str and a few others are all identical with differnt names/icons milled into it
#20
Honda-Tech Member
Re: Ericks Racing T.B. vs stock ITR T.B. (FawkWomenDrivers)
inline four?
from what ive seen, the rpm eng, erick's, str and a few others are all identical with differnt names/icons milled into it
from what ive seen, the rpm eng, erick's, str and a few others are all identical with differnt names/icons milled into it
#22
Honda-Tech Member
Re: Ericks Racing T.B. vs stock ITR T.B. (SIXTYdashONE)
it's all the same cnc design
Erics, STR, holley, BBK etc.. all the same type... basically they all have the same design they just etch their names on the top part and resell it.....
Erics, STR, holley, BBK etc.. all the same type... basically they all have the same design they just etch their names on the top part and resell it.....
#23
Honda-Tech Member
Re: Ericks Racing T.B. vs stock ITR T.B. (SIXTYdashONE)
Here's their site but I don't quite see a match.
http://www.accufabracing.com/
I met a guy on Sun who works at Accufab. I wish I would have known to ask him about them..
http://www.accufabracing.com/
I met a guy on Sun who works at Accufab. I wish I would have known to ask him about them..
#24
Honda-Tech Member
Join Date: Aug 2002
Location: JDM ricer land, CA
Posts: 2,901
Likes: 0
Received 0 Likes
on
0 Posts
Re: Ericks Racing T.B. vs stock ITR T.B. (HotWheelz-turboh22dx)
it's all the same cnc design
Erics, STR, holley, BBK etc.. all the same type... basically they all have the same design they just etch their names on the top part and resell it.....
Erics, STR, holley, BBK etc.. all the same type... basically they all have the same design they just etch their names on the top part and resell it.....
#25
Honda-Tech Member
Join Date: Jul 2002
Location: ORANGE COUNTY CALIFORNIA, US
Posts: 1,669
Likes: 0
Received 0 Likes
on
0 Posts
Re: Ericks Racing T.B. vs stock ITR T.B. (FawkWomenDrivers)
I was told by str that they make theres in house. I have compared erick's to str's the are both similar and both are very high qaulity but ther not the same tb with different names