FS: Cleaning out Garage
Thread Starter
Honda-Tech Member
Joined: Mar 2002
Posts: 2,178
Likes: 1
From: Portland, OR
FS: Cleaning out Garage
UPDATED PRICES!!!
HKS SUPER-MEGA FLOW intake https://honda-tech.com/zerothread?id=382223 $100 shipped, with BOTH intake pipes
Gude NA head package for D-series. Includes: Port/Polished/Milled SOHC VTEC D16Z6 head. Big-Bore throttle body, matched to ported intake manifold. Performance ground Camshaft with AEM tru-time cam gear. GUDE reprogrammed ECU. Reasonably low miles, but unknown, very good condition. Should make atleast 160hp at crank (on a 1.6liter). Costs $1400 for Gude to work on YOUR STOCK PARTS. Costs over $2000, outright. Will break up for right price(s), but would rather keep the kids together. MUCH cheaper than an engine swap and makes good power.
INCLUDING!!!!:
Mr.Gasket high compression head gasket (great for above package).
JDM SOHC "VTEC" valvecover. Reads "VTEC" on it, black ripple powder-coated. (would also look nice with above package)
$1000, shipped for all this!!!
(IN THE NEAR FUTURE) I will also have a second D-series port-matched/polished intake manifold, without TB...make offer.
1 set(4) Honda 240cc injectors. work perfectly. $40, shipped. obo
1 set(4) DSM(I think?) 240-290cc injectors (not sure which they are, but I was told they are 290cc and they have a pinkish top). They fit in ground out honda seals. Good condition, but should be cleaned. $40 shipped, obo.
Rear Anti-Sway bar from Del Sol Si Good condition, some bubbles in the paint from corrosion. Make offer
Stock front corner light covers 92-95 Civic 2dr/3dr. Good condition, portion of passenger side is melted on top outside (not very noticeable, and I have NO idea how this happened!!) make offer.
There maybe more, but that's all I can think of now. I can take pictures of some of this stuff, but my camera isn't working now, so it may take a few. I'll be more than happy to give better descriptions if necessary.
Also, I will accept trades on some of this, with additional cash going to or fromt he buyer, depending...
I'm looking for:
GC Coil-overs
KYB AGX shocks
Apex'i VAFC
(New) performance clutch and pressure plate for d16z6
[Modified by ion_four, 7:36 AM 1/11/2003]
[Modified by ion_four, 4:09 AM 1/12/2003]
[Modified by ion_four, 6:11 AM 1/13/2003]
HKS SUPER-MEGA FLOW intake https://honda-tech.com/zerothread?id=382223 $100 shipped, with BOTH intake pipes
Gude NA head package for D-series. Includes: Port/Polished/Milled SOHC VTEC D16Z6 head. Big-Bore throttle body, matched to ported intake manifold. Performance ground Camshaft with AEM tru-time cam gear. GUDE reprogrammed ECU. Reasonably low miles, but unknown, very good condition. Should make atleast 160hp at crank (on a 1.6liter). Costs $1400 for Gude to work on YOUR STOCK PARTS. Costs over $2000, outright. Will break up for right price(s), but would rather keep the kids together. MUCH cheaper than an engine swap and makes good power.
INCLUDING!!!!:
Mr.Gasket high compression head gasket (great for above package).
JDM SOHC "VTEC" valvecover. Reads "VTEC" on it, black ripple powder-coated. (would also look nice with above package)
$1000, shipped for all this!!!
(IN THE NEAR FUTURE) I will also have a second D-series port-matched/polished intake manifold, without TB...make offer.
1 set(4) Honda 240cc injectors. work perfectly. $40, shipped. obo
1 set(4) DSM(I think?) 240-290cc injectors (not sure which they are, but I was told they are 290cc and they have a pinkish top). They fit in ground out honda seals. Good condition, but should be cleaned. $40 shipped, obo.
Rear Anti-Sway bar from Del Sol Si Good condition, some bubbles in the paint from corrosion. Make offer
Stock front corner light covers 92-95 Civic 2dr/3dr. Good condition, portion of passenger side is melted on top outside (not very noticeable, and I have NO idea how this happened!!) make offer.
There maybe more, but that's all I can think of now. I can take pictures of some of this stuff, but my camera isn't working now, so it may take a few. I'll be more than happy to give better descriptions if necessary.
Also, I will accept trades on some of this, with additional cash going to or fromt he buyer, depending...
I'm looking for:
GC Coil-overs
KYB AGX shocks
Apex'i VAFC
(New) performance clutch and pressure plate for d16z6
[Modified by ion_four, 7:36 AM 1/11/2003]
[Modified by ion_four, 4:09 AM 1/12/2003]
[Modified by ion_four, 6:11 AM 1/13/2003]
Thread
Thread Starter
Forum
Replies
Last Post
BlueTeg
For Sale
15
Mar 18, 2010 07:50 AM