Can i see pics of SOHC turbo engine bays please?
my website has a couple, hasn't been updated in a while though.
running 11's - 12's those type of setups.
Trending Topics
These are some old pics, before the sheet metal intake manifold, and before the GE block that i am building now..
Start of the new 400WHP setup.
One more
Hope that works for you..
Brian
Start of the new 400WHP setup.
One more
Hope that works for you..
Brian
http://homepages.ihug.co.nz/~edastill/honda.htm
The exterior of the car has been changed completely so please don't hassle me
The exterior of the car has been changed completely so please don't hassle me
These are some old pics, before the sheet metal intake manifold, and before the GE block that i am building now..
Start of the new 400WHP setup.
One more
Hope that works for you..
Brian
Start of the new 400WHP setup.
One more
Hope that works for you..
Brian
Should be done by this saturday!!!
that thing is purdy
that thing is purdy
i aree nice as hell, but why diddnt you leave the compressor on the drivers side? easier for i cpiping and for the DP. right? just curious, cant wait to seeit finished
Thanks for the comments
hey bootstedED9, can you tell me what pipes you used from the TB to the IC??
some pics would be good
do you have a pipe below the radiator??
thank you
some pics would be good
do you have a pipe below the radiator??
thank you
here's mine before i ripped the engine+turbo out and installed my free B20B engine 



Custom direct-port fuel injection (i have 8 fuel injectors all together - 4 stock injectors, and these B18C "additional" injectors) - all this was controlled by my Link ECU




Custom direct-port fuel injection (i have 8 fuel injectors all together - 4 stock injectors, and these B18C "additional" injectors) - all this was controlled by my Link ECU
Whew...do those legs go allll the way up?
asian girlies for ya
nathan that picture makes me scuuuured



