i wanna make my own but i just need to know what size,type of material is used for a dump tube for a tial wastegate. Thinking of doing that side exit outta the bumper thing but might just do it str8 down...does it have to be stainless??
is this the right flange? http://store.yahoo.com/cheapturbo/wasflan35del.html
thx guys

 

The pipe size is 1.5". That's the right flange if you have the 35mm tial wastegate, though www.sr20performance.com has it on sale for $10 . It doesn't have to be stainless, you could paint it with high temp paint if you use aluminized steel or just leave it unpainted. You could probably just use a u or j bend from jcwhitney.


[Modified by Brad, 12:53 AM 1/5/2003]

 

i built my own. 1.5" j bend from Jegs.com, tial flange, arc welded. Then i painted it w/ high temp paint.

 

heres a pic of mine, with my Tial 46mm flange and soem Home Depot 1.99 1.5 inch(i think) piping..

 

sweet guys thx and nice welds on that

 

Hey, this was a JC Whitney 180 degree 1 1/2" piece with a 35mm flange welded to it......I painted it with 1500 degree paint from Jegs.


And here it is on the car with a piece of flex pipe clamped to it and then running out to the driver side bumper.........you can see it under the filter heading to the side.

And what the hell, here's the final touch



[Modified by Farnsrocket, 8:51 AM 1/5/2003]

 

Yeah Jon has on nice "Dump Tube" setups I've seen personally !!! w00t !
.
.
.
.


[Modified by Honda4CX-R, 9:28 AM 1/9/2003]

 

Damn Farn that thing is going to FLY!!!

 

Thanks guys!

 

I know that might not serve the purpose but that looks cool as hell Farnsrocket !

 

I am not sure what ya mean? What purpose isn't it serving?

 

Yeah Jon !!!! If youre not getting that SOOT inside the engine bay, you're bound to loose precious horsepowa !!! LOL .... (Sheeesh some people I tell ya)