I see ppl cutting 1.7's easy, anyone ever done a 1.5 or better with open diff ...


Greg

 

I think Terry is somewhere in the 1.6x range...Allmotor too...

 

With only 191whp N/A, I was pulling 1.80 every time on GS-R wheels and 20 inchers.

I did actually WORSE on 22x8x13's on Bogies. Like 1.85's... not sure why. Maybe I didn't have enough power to sling shot off with them...

 

My old daily driver(b16 allmotor crx) had 1.68 a couple of times in lacr on 22x9x13 bogies.


[Modified by ProstockH22crx, 9:07 PM 11/7/2002]

 

Damn...I'm way behind.

I only pulled low 1.9s on 20x8x14 slicks mounted on steelies.

-Rod

 

I was able to pull 2.2s and the occasional 2.1 on Fisk Phantoms 195/50R15 with open diff...and in one freak of a run i pulled a 2.0 back when i had a B16. Slicks with the B16 got me nowhere fast

I ran 1.8s last time i went with 22" slicks & B20vtec.

 

2.10's but that's on street tyres...

 

with 20x8x14 MT's

1.847 on a juiced SOHC VTEC and open diff...........

"Have you tuned you swaybar lately?"

BTW, Thanks to Greg, I dropped to 1.81 with the Kaaz LSD.


Did I mention a stock block Z6 and 85 shot?????


[Modified by Mista Bone, 8:30 AM 11/8/2002]

 

hey bone, thats pretty good actually for the single. a buddy of mine had boost on his stock CRX Si motor and welded the diff to cut 1.8's with slicks, damn thing ran mid 12's for a stock block.

he's moved on since, now he's a boosting a stock gsr motor with 13psi and is busting 11.3's left to right in a bubble... then they kik him off the track of course ... no cage

greg




[Modified by CHEETAH, 3:11 PM 11/8/2002]

 

i think "Earl" on this board is running 9s with an Open Diff,but dont know what his 60' is.

 

1.66 is my best with a stock gsr diff

 

wow, I'd hate to see what a spool or LSD would do to your e/t ... very good 60's on open diff. since you car is a racecar, why not jsut weld it together ? or do you have other plans ?

greg

 

I think that his 11.55 pass was with a 1.55 60ft, and LSD. I may be wrong though.

Suprdave

 

we use a spool now. best 60 ft with spool is 1.55

 

I was able to run a 1.52 with an open diff...usually high 1.5- low 1.6's with open diff. We are not running it anymore though.

 

2.2 on with d16a6 and i/h/e. crappy street tires on 14inch steelies.

 

[Modified by simple4012, 10:55 PM 11/9/2002]

 

2.085 with 15" GSR wheels/Bridgestone Potenza SO3 Pole Positions (195/50/R15). Now i'm running 205/50/R15 SO3's on some cheap *** PepBoy wheels, once I get the LS motor running right we'll see what she'll pull.

 

1.7's, but I live up at 5830ft, I'd imagine it would be a 1.6 down where you low-landers are at. 22"/8"/15" Mickey Thompson Drag ET's on steelies.

 

1.37 with a quaife...

 

Tony, did you get to see Jojo's timeslip when he had that almost impossible rolling start 1.2 60 foot time?

 

Yeah, it must be nice to be able to get a rolling start. Imagine the possibilities....

 

I cut a 2.2 last time at the track. 89 CRX dx and 15" Toyo Proxes TS1's mounted on 15" Rota Slips.

 

I did just about the same on 20x8x14 MT's

1.851 single cam VTEC, open diff 70 shot stock y8 block a few years back. Y8 is still running strong.

 

SO GUYS HOW DO YOU WARM TYRES!!!!!!!!!!!!!!!!!! What do you find works for you??Thanks and sorry for yelling