I need to know if 14 inch HX rims will clear the GSR calipers and rotors?

 

well... the 92-95 Si's had the same size rotors as the GSR's. the calipers are different, but i'm not sure if the size of the calipers are different. the 92-95 Si's/EX's came with 14" steelies, so i don't see why they wouldn't clear the rim.

i'm sure there must be someone on here that knows for sure.

 

No they didn't either. I have my stock 92 Si rotors and I also have the stock 2000 GSR rotors and they are not the same size. The GSR rotors are over 1/2 and inch bigger.

 

hmm... that's pretty strange. i looked in the brembo catalog and the 92-95 Si/EX rotors share the same part number as the GSR's.

 

EX is the same as GSR

CX/VX/DX/Si is small.

Case closed.

 

well let me throw this in 92-93 Si's have smaller rotors in the front and 94-95 have the same size rotor in the front as the gsr i know because i used to have one and to get the hx wheels to fit you'll either need a spacer or to grind bit off the caliper where the spoke meets the caliper

 

Ummmmm Si and Ex are the same size. And the ones I had on my Si I think are VX or DX rotors and calipers they are 9 3/4 verses the Integra 10 1/2. I think that normal Si rotors are the same. So the guy that said that they should be the same is correct.

 

Thanks for the info. By the way good numbers on your SOHC

 

I asked the same question.
https://honda-tech.com/zerothread?id=280524

 

Well whatever, my Si has the small ones.

I assume the Si's w/ the big ones are the ABS equipped ones...

 

correctomundo dude and thanks extreme

 

isn't Si the same **** as EX? in US, EX... in CANADA, Si... i dunno..

 

aw... dude... let the thread die..