how did you guys mount the gauges in the position to replace the dimmer and the cruise control. What sizes were your gauges and did you have to make hole bigger or did it just fit ? I have an air/fuel gauge and it won't fit in the hole. it is 2 1/16 and the mounting screws are hella long. a little help would be nice thanks

 

I don't have this done, but I would assume to trim the hole to make it large enough and just leave it in there, you don't need to mount it, then just wire it up and thats it!

 

You have to dremel the holes to fit the gauges. It looks good but your dimmer and cruise will never fit again.

 

is there a pic of this mod? i don't have cruise so there is a plastic there

 

thanks all, now i really regret not ordering the autometer gauge bezzle. i want to keep it low profile but i also want to be able to put everything back to stock. anyother way to mount it to keep it low profile besides the autometer gauge bezzle?

 

Try this thread I started a month ago:

https://honda-tech.com/zerothread?id=207313