B16 COMPLETE SWAP.....made 190whp...Check all the goodies inside
car was totaled, im done with racing.
stock 1 series b16 block.GSR ported head,with erick's racing GSR manifold(same EXCAT manifold on his 10sec. coupe)
ericks racing 70mmTB(blue anadized)
CTRcams,AEM fuel rail,Aem cam gears,Aem FPR.blueprinted injectors by RC.True SPOON headgasket(no honda split leaking BS)
all type-r valves,true CROWER valvetrain and retainers(good to 10,500.proven many times). JG headers, YS1 cable tranny(best gearing possible)with ACT disk and type-r pressure plate along with lightened type-r flywheel.VERY special ECU and harness.Place racing moutns for an EF.custom shift linkage.and notched crossmemer.you MUST use all parts listed together to duplicate this power,i will NOT part out anything. Motor dyno'd in at 190+ at import builders. you can see the chart posted on http://WWW.importreview.com under dyno charts-1.6-record.
im selling EVERYHTING thats in this car. buyer will be getting alot more then posted and i WILL help you install this for FREE.
$3,800 OBO.
stock 1 series b16 block.GSR ported head,with erick's racing GSR manifold(same EXCAT manifold on his 10sec. coupe)
ericks racing 70mmTB(blue anadized)
CTRcams,AEM fuel rail,Aem cam gears,Aem FPR.blueprinted injectors by RC.True SPOON headgasket(no honda split leaking BS)
all type-r valves,true CROWER valvetrain and retainers(good to 10,500.proven many times). JG headers, YS1 cable tranny(best gearing possible)with ACT disk and type-r pressure plate along with lightened type-r flywheel.VERY special ECU and harness.Place racing moutns for an EF.custom shift linkage.and notched crossmemer.you MUST use all parts listed together to duplicate this power,i will NOT part out anything. Motor dyno'd in at 190+ at import builders. you can see the chart posted on http://WWW.importreview.com under dyno charts-1.6-record.
im selling EVERYHTING thats in this car. buyer will be getting alot more then posted and i WILL help you install this for FREE.
$3,800 OBO.
dang, would this work in a 98 EX somehow?? I wish u were in WI, then u could put it in
I REALLY WANT THIS!
mike
I REALLY WANT THIS!mike
any pics. how do i pay you, i am in chicago il. email me at faraj77@aol.com, u might have a buyer here. thanks
Trending Topics
Thanks.....call JEFF at importbuilders. he knows my car well, he and i have made over 100 passes there trying to find the perfect b16 set up....and this is IT.....motor runs like a champ...its a bone stock pr3 BLOCK also.... just all head work
this motor ran 13.2 at 103 at carlsbad, in a 89 dx hatch. STOCK doors, MUFFLER bolted up. FULL interior and carpet. HEADLIGHT sitll in.....
this is a EASY 12 second motor.
letting go CHEAP for califona buyer.
190 to the wheels??????????? anyone ever seen that on a b16. STOCK PR3 block..CTR CAMS?
this is a EASY 12 second motor.
letting go CHEAP for califona buyer.
190 to the wheels??????????? anyone ever seen that on a b16. STOCK PR3 block..CTR CAMS?
500 LOOKS and not a serious off yet?
cmon....90% of people on here couldnt get 190 with juns cams on a 1.8 motor.
were talking 1.6 with CTR CAMS!!!!!!!!!!!!!!!! peak power at 9000
cmon....90% of people on here couldnt get 190 with juns cams on a 1.8 motor.
were talking 1.6 with CTR CAMS!!!!!!!!!!!!!!!! peak power at 9000
That engine sounds absolutely sick...if I had a good full time job...I'd buy it...for that price...you're getting a lot...that's about what just a GSR swap goes for...with more HP. Free bump for you.
Thread
Thread Starter
Forum
Replies
Last Post
Evoinboost
Classifieds: Forced Induction
2
May 15, 2014 01:19 PM
PaImportTuner
Classifieds: Forced Induction
2
Aug 19, 2005 06:46 PM




