I've seen em before on team Integra... But I was banned because I pissed off the owner of the site So I can't go on anymore.

I searched on here but got nothing.

Anyway, I was thinking about doing that and would like to see/hear any suggestions anybody may have. I figured I'd post in here since there isn't an interior forum

 

i have my autometer shift light in the left one.

my rs didn't come with CC, it was just that dummy tweeter-looking plug so i yanked it out and shoved the light in there. fits pretty darn good, i'll take a pic of it if you'd like.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HGZ &raquo;</TD></TR><TR><TD CLASS="quote">i have my autometer shift light in the left one.

my rs didn't come with CC, it was just that dummy tweeter-looking plug so i yanked it out and shoved the light in there. fits pretty darn good, i'll take a pic of it if you'd like.</TD></TR></TABLE>

Plz do. Stupid banning won't let me search TI

**Edit**
Found a backdoor to TI. Bwahahah. take that morning_Sun or whatever your name is!!!1!





Thats all I can find. Still havn't seen any w/mini gauges.


Modified by mac_24_seven at 12:28 PM 10/14/2008

 

you can use a drill and a hole saw and make it bigger so a normal gauge will fit is what i did

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by steveharrmr23 &raquo;</TD></TR><TR><TD CLASS="quote">you can use a drill and a hole saw and make it bigger so a normal gauge will fit is what i did</TD></TR></TABLE>

Post pics of your setup plz.

 

will do this eve i only have one gauge installed have not figured out what to put in the other whole yet

 

bump cuz im also interested in this

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by steveharrmr23 &raquo;</TD></TR><TR><TD CLASS="quote">you can use a drill and a hole saw and make it bigger so a normal gauge will fit is what i did</TD></TR></TABLE>

Thats also what I did, using autometer 2 1/16 gauges, until it was stolen. Its almost a perfet fit, just have to make the hole a tad bit bigger. Let me find some pics.

 

[IMG][/IMG]

Is this what you're talking about?

I took out my cruise control switch cause I never used it, and placed an autometer gauge in there. I used a dremel and rounded out the hole to make it fit.

 

taken with my phone. you get the idea. i had to remove the rear half of the light casing in order for it to fit (note: light from the bulb will leak and you'll see it in the corner of your gauge cluster. fix to your liking). didn't have to do much dremeling to make the hole wider.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JmurGSR98 &raquo;</TD></TR><TR><TD CLASS="quote"> I used a dremel and rounded out the hole to make it fit.</TD></TR></TABLE>

All you have to do, just keep taking small amounts out, and test fit.

Did this for both sides, no mounting, just slid them in afterward.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mac_24_seven &raquo;</TD></TR><TR><TD CLASS="quote">

Post pics of your setup plz.</TD></TR></TABLE> appologize to you mac as my pictures did not come out hope to get them in the day light

 

so basically if you decide to set your guages there it will have to be permanent, unless you have an extra dash laying around

 

nah you can repair it with fiberglass

 

what about the black skin texture? plus repairing it will get really messy

 

nope not that bad i patched that leather piece on a friends care cause he drilled a whole in the dash how you can see the patch but at least it is better then a big whole but where they are it is not a big deal doing a patch job there cause it is not to often looked at real close but it all depends on the person working on the car i know wants i have a car it is mine till the end of its exisitance

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by steveharrmr23 &raquo;</TD></TR><TR><TD CLASS="quote">nope not that bad i patched that leather piece on a friends care cause he drilled a whole in the dash how you can see the patch but at least it is better then a big whole but where they are it is not a big deal doing a patch job there cause it is not to often looked at real close but it all depends on the person working on the car i know wants i have a car it is mine till the end of its exisitance </TD></TR></TABLE>

Is it that hard to use periods?????!! Geez mang, it makes it so hard to read a post when there isn't some semblance of proper punctuation. Not asking for college level English skills here, ya know?

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vietnamezerice &raquo;</TD></TR><TR><TD CLASS="quote">so basically if you decide to set your gauges there it will have to be permanent, unless you have an extra dash laying around </TD></TR></TABLE>

Thats why I wanted to see mini gauges, in case I changed my mind. I mean, I've swapped dashes before, it's not the hardest thing to do, but I'd rather not have to do it again

Anybody else have any pics?

 

From TI















Best pix i saw.. Hope you enjoy!

 

This is what I did when I didnt want my gauges on the pillar.

I designed a way to put UP TO 4 gauges by the stock gauges while keeping great stock gauge visibility.

TELL ME WHAT YOU GUYS THINK...

 

looks really good!

 

Thats sick man.. Details Plz.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mac_24_seven &raquo;</TD></TR><TR><TD CLASS="quote">Thats sick man.. Details Plz.</TD></TR></TABLE>

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vietnamezerice &raquo;</TD></TR><TR><TD CLASS="quote">looks really good! </TD></TR></TABLE>

Thanks guys!! I really appreciate it!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by luv2boost &raquo;</TD></TR><TR><TD CLASS="quote">

Thanks guys!! I really appreciate it! </TD></TR></TABLE>

I think they want details on the install.

Looks great!

 

sick!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SoTexDC2 &raquo;</TD></TR><TR><TD CLASS="quote">

I think they want details on the install.

Looks great! </TD></TR></TABLE>


Thanks again for the positive words!

I hand make these individually which is pretty time consuming. I then matched stock bezel texture and color so the finished product doesn't look shiny and cheap like many "similar" products out there.

Ill post more info in my WTB thread:
https://honda-tech.com/zero...93446