Ok, so the guy I bought my car from tried to swap interiors before, and kind of did a frankenstein job of it. There's the interior (carpeting, dash, plastic panels, etc) from a 95 SI hatch in it, and GSR leather seats for the front and back. I'm not sure which year/type of GSR they're from, but the back seats don't fit.

They fit, but there are gaps on the left and right sides, and the backrest portion of the seat isn't bolted to anything. Plus the carpet doesn't fit or bolt down well, and I'm missing seatbelts, but that's another day.

I've already searched for the answer to my topic, and haven't really found anything other than confirmations that they'll fit. I know they'll fit, but I'm wondering what parts I need to make them fit the way back seats should fit, or if I should just take them all out and trade someone for a stock 93 interior and seats, because the GSR leather isn't that big of a deal to me (swamp *** ftl)

(Forgive the bad picture quality, my curve camera is all I have)

 

those are 4 door gsr seats the ones that fit perfect are the coupe seats

 

So there's no way to make the ones I have in there right now fit correctly? I'd have to trade them for seats from a 2 door GSR?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by xnvb &raquo;</TD></TR><TR><TD CLASS="quote">So there's no way to make the ones I have in there right now fit correctly? I'd have to trade them for seats from a 2 door GSR?</TD></TR></TABLE>

2 door GS-R seats in a hatch will give you gaps on either side, not sure about in a coupe, I think 4 door GS-R seats are wider so if anything 4 door GS-R seats will fit better. Really not sure if yours are 2 door or 4 door.

 

2 door integra rear seat backrest wont latch on your coupe . They have the latches on the outsides and are 50/50 split backrests no center hinge on your coupe. The 4 door teggie backrest will bolt onto the lower hinges of the stock civic coupe (your missing them, pick some up at your local junk yard) and lock on the top center latch.

The problem with them is the gap thats on the sides your first picture shows this, i have the teggie sedan rear backrest in my coupe and have the same gap on both sides. If you can deal with the gap keep them and just grab some hinges off any coupe, if not swap them out for stock rear civic seats. Good luck.

 

you need to get the backrest from a 2dr integra, and keep the 4 door bottom. Then you will have a perfect fit. I have done this in my hatch and they fit awsome.

 

Gwegcivic will the backrest from a 2dr integra and 4 door bottom fit in a 99 civic hatch? Will the backrest and bottom of a 4 door integra fit in a 2000 civic 4 door? thanks

 

i am not sure. I would suggest searching the archives for the anwser i know there is a way to do it just not sure on it. I do believe that the bottom has to be from a 2dr though to eliminate the gap created. Just not sure about the backs. I will go out on a limp and say that it is the 2 dr that you need. but please someone correct me if i am wrong