1998 Acura Integra Type R #463 Mugen aero, volk wheels, brand new bottom end North Carolina
Thread Starter
Joined: Dec 2001
Posts: 9,091
Likes: 28
From: the internet and I WILL STEP ON YOU
im going to start parting it out shortly but just in case someone has a lot of $$$ they want to spend on a 10 year old integra
1998 ITR #463
roughly 115k miles on chassis
shaved antenna, roof mount stubby
4dr rear handles(no key holes)
EDM Integra tail lights
EDM rear fog light
JDM stanley clear sidemarkers
JDM HID front end conversion
Mugen wing with shaved side emblems
Mugen aero bumper cover
Mugen sideskirts
Mugen hood
*BRAND NEW FROM ACURA B18C5 BOTTOM END, under 1000 miles on it*
B18cR head cleaned and valve job by RPR/abacus racing
AEBS power plus 65mm throttlebody
Blox intake manifold
Rocket motorsports springs/retainers
Buddy Club Spec 3+ cams
Toda Camgears
Mugen Formula Valvecover painted candy teal
Mugen oil cap
Mugen Intake
TDM hytech copy race header coated semigloss grey by HPC
Mugen Twin loop axleback
Tanabe B pipe
Hasport Medium mounts
custom AN flexlite with black fittings fuel setup
C&R/visteon radiator
Mugen radiator cap
Samco sport purple coolant hoses
OEM usdm itr tranny bought from dealership in 2000
new outputshaft bearings(the big $45 each roller bearings)
new 3-4 synch set
mfactory 4.9 final drive
CHASE BAYS full wire tuck
CHASE BAYS brake line tuck using 40/40 prop valve
Luserkid stainless clutch line
Oem ac/harness hole plug
powersteering breather for easy turning
JDM ITR black with red stithing shift boot
JDM ITR cluster
Mugen speedometer
Mugen cluster bezel
Mugen S1 driver and passenger bucket seats
Mugen bucket slider rails for driver and passenger
Mugen FG360, with optional center pad, horns are hooked up
Mugen DC/EG steering boss (with turn signal delete)
Mugen black shift ****
Mugen pedals
Passenger airbag delete tray
Clock blockoff
Dual din radio blockoff
AC oem button delete
Armrest delete
RS handle bezels(removes lock/unlock switches)
16x7 +33 Volk SE37K
Ingalls camber kits FR/RR
PIC apex coilovers
Mugen 1st gen front strut bar
Mugen 1st gen rear strut bar
Mugen AGBS brake system with mugen stainless lines front and rear
viper 5900 alarm
4 airhorns(which are hooked to steeringwheel horn button as well)
starter kill
fuel pump kill
ecu kill
3* digital tilt sensor
back up battery
this is just a shot in the dark. I will be parting it out shortly so if you are interested lmk ASAP. price will be 20K FIRM. expensive? yes. worth it? up to you. I have invested MUCH more in this car. the paint is FLAWLESS. Sikkens brand is what has been used. engine back and rear hatch area paint is the same. I replaced ALL outter moldings/trim on the car back in april. Even at Son's pricing youre looking at $1000 just for this. Other small things include titanium header bolts in purple, purple titanium nuts in the engine bay for the strut tower bar and upper control arms as well as they drivers side mount. anodized purple aluminum bolts/washers for the fenders/headlights etc.










Modified by Casey at 2:37 PM 8/3/2008
1998 ITR #463
roughly 115k miles on chassis
shaved antenna, roof mount stubby
4dr rear handles(no key holes)
EDM Integra tail lights
EDM rear fog light
JDM stanley clear sidemarkers
JDM HID front end conversion
Mugen wing with shaved side emblems
Mugen aero bumper cover
Mugen sideskirts
Mugen hood
*BRAND NEW FROM ACURA B18C5 BOTTOM END, under 1000 miles on it*
B18cR head cleaned and valve job by RPR/abacus racing
AEBS power plus 65mm throttlebody
Blox intake manifold
Rocket motorsports springs/retainers
Buddy Club Spec 3+ cams
Toda Camgears
Mugen Formula Valvecover painted candy teal
Mugen oil cap
Mugen Intake
TDM hytech copy race header coated semigloss grey by HPC
Mugen Twin loop axleback
Tanabe B pipe
Hasport Medium mounts
custom AN flexlite with black fittings fuel setup
C&R/visteon radiator
Mugen radiator cap
Samco sport purple coolant hoses
OEM usdm itr tranny bought from dealership in 2000
new outputshaft bearings(the big $45 each roller bearings)
new 3-4 synch set
mfactory 4.9 final drive
CHASE BAYS full wire tuck
CHASE BAYS brake line tuck using 40/40 prop valve
Luserkid stainless clutch line
Oem ac/harness hole plug
powersteering breather for easy turning
JDM ITR black with red stithing shift boot
JDM ITR cluster
Mugen speedometer
Mugen cluster bezel
Mugen S1 driver and passenger bucket seats
Mugen bucket slider rails for driver and passenger
Mugen FG360, with optional center pad, horns are hooked up
Mugen DC/EG steering boss (with turn signal delete)
Mugen black shift ****
Mugen pedals
Passenger airbag delete tray
Clock blockoff
Dual din radio blockoff
AC oem button delete
Armrest delete
RS handle bezels(removes lock/unlock switches)
16x7 +33 Volk SE37K
Ingalls camber kits FR/RR
PIC apex coilovers
Mugen 1st gen front strut bar
Mugen 1st gen rear strut bar
Mugen AGBS brake system with mugen stainless lines front and rear
viper 5900 alarm
4 airhorns(which are hooked to steeringwheel horn button as well)
starter kill
fuel pump kill
ecu kill
3* digital tilt sensor
back up battery
this is just a shot in the dark. I will be parting it out shortly so if you are interested lmk ASAP. price will be 20K FIRM. expensive? yes. worth it? up to you. I have invested MUCH more in this car. the paint is FLAWLESS. Sikkens brand is what has been used. engine back and rear hatch area paint is the same. I replaced ALL outter moldings/trim on the car back in april. Even at Son's pricing youre looking at $1000 just for this. Other small things include titanium header bolts in purple, purple titanium nuts in the engine bay for the strut tower bar and upper control arms as well as they drivers side mount. anodized purple aluminum bolts/washers for the fenders/headlights etc.










Modified by Casey at 2:37 PM 8/3/2008
Thread Starter
Joined: Dec 2001
Posts: 9,091
Likes: 28
From: the internet and I WILL STEP ON YOU
thanks guys, i forgot to add some tranny info that ive updated now
Dang! Deff bump for a cool *** dude and a sick *** car! why ya selling casey? ready for something new?
Trending Topics
cant believe you're parting out/selling so soon after finishing it.. but good luck with selling, and with whatever your next project may be
B*a*n*n*e*d
iTrader: (1)
Joined: Mar 2004
Posts: 17,750
Likes: 0
From: new jersey home of wanna be's posers claimers ricers biters and where everyone fakes the funk
one of my favorite ITR's. car is soo badass with all authentic parts. seen it in person and its flawless. goodluck with the sale casey
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by teg97 »</TD></TR><TR><TD CLASS="quote">one of the best hands down...good luck casey.
</TD></TR></TABLE>
x2
</TD></TR></TABLE>x2
bout drooled all over the place when i saw it at IA. def worth the money cause its a beautifly constructed car. sucks you wanna get rid of it, but im sure youll have tricks up your sleeve
bump for a showstopper
bump for a showstopper
Can i just buy the sexy owner?
I tried to touch your car at the meet and it zapped me...with its ora...because its so sexy. mmm. I hope my bff4Lyfe gets a peice of that car ***.
I tried to touch your car at the meet and it zapped me...with its ora...because its so sexy. mmm. I hope my bff4Lyfe gets a peice of that car ***.





