Obd0 Pr4 and DA rear trans bracket (must have for EF B series swap)
I have a virgin 5 speed PR4 that I have no use for since I did an obd1 conversion on my crx. $50-shipped. Shipping prices have gone through the roof, but if you live in the midwest/east coast I will knock some money off.
Next up I have a rear transmission bracket from a DA integra. This is the bracket you need to put a B series into your EF chassis. Again $50shipped but will knock off money depending on where you live.
Any more questions you can either post here or just shoot me an email: guy_from_nerk@hotmail.com
Next up I have a rear transmission bracket from a DA integra. This is the bracket you need to put a B series into your EF chassis. Again $50shipped but will knock off money depending on where you live.
Any more questions you can either post here or just shoot me an email: guy_from_nerk@hotmail.com
UPS Ground By End of Day,
Thursday
July 17, 2008 9.20 USD*
I can do 40shipped on it to your zip code
Thats going off a 5lb weight. email me at guy_from_nerk@hotmail.com if your interested. Much easier way of getting ahold of me then on here. I can ship out asap
Thursday
July 17, 2008 9.20 USD*
I can do 40shipped on it to your zip code
Thats going off a 5lb weight. email me at guy_from_nerk@hotmail.com if your interested. Much easier way of getting ahold of me then on here. I can ship out asap
When you say rear bracket you mean the bracket mounted on the rear of the tranny to the side of the engine bay? Im guessing yes since there is only one mount on the tranny. Could you post a pic?
Thread
Thread Starter
Forum
Replies
Last Post
90zcCRX
Northeast (Sales)
5
Apr 8, 2007 03:48 PM
4gencivicef9
Honda CRX / EF Civic (1988 - 1991)
4
Apr 27, 2006 05:10 AM




