I can get full 3" exhaust systems without the muffler for cheap. These are pre bent(all mandrel bent BTW)for the specific car, but welding is required. THey come with the piping, flanges, hangers, etc...The flanges and hangers will have to be welded on. You will need a muffler though, which I can probably get for pretty cheap also

we need at least 10 buyers for this price

aluminized steel=$110 plus shipping

stainless steel=$160 plus shipping

 

I am intersted. 93 Prelude VTEC, let me know. SS and I would also be interested in a resonator if it is possible.


Brandon Gilstrap
2032 Antelope Place
Virginia Beach, VA 23456
(757)581-2783


[Modified by gsr*lude, 6:41 AM 7/18/2002]

 

Can we get a resonator on it?

 

sounds good to me . how much will shipping be to 95124 san jose ca? thanks

 

is the turbo gb gonna happen?

 

Interested in the SS 3" piping. Any ideas on shipping to San Francisco, Ca. 94116?

Edit: for a '94 GSR


[Modified by Stock@$$GSR, 5:38 PM 7/10/2002]

 

im interested in the 3inch SS for a 98 gsr... Bump

 

I am interested

 

pix?

 

how bout a high flo cat also with magnaflow muffler

 

i'm in for a 95 prelude vtec.
is this to the muffer? or to the axle?
what kind of stainless? 304?
i'd like a ss resonator too please.


[Modified by kidkutz, 10:26 PM 7/10/2002]

 

Paul:

How about an application list? I only ask because I'm assuming that you don't have one for a 1st gen CRX Si?

Thanks,
Sonny

 

I think I would be in!! I would like to see a pic though

Also who is making them for you?


[Modified by SlowB16, 3:23 AM 7/11/2002]

 

I'll try to get an application list for all vehicles and what else he can get(resonators, mufflers, cats, flexpipes, etc..).

 

pix are at http://www.vrsexhaust.com under tubing kits, but none of the honda applications are up on the website yet.

 

I want in. 97 ITR

 

TTT

Sonny

 

hmm...i think i might be down for this! SS for sure!

 

will any cutting be involved ?? i./e when installing a muffler etcc .. any pipe need to be added ?

 

Paul, I am in.

I know you're just getting this sorted out, so here is my input for what I am looking for:

2.5" from cat to muffler no resonator. stainless. I'll go 3" if thats what everyone else wants.

Edit - oh you said 3"..ok 3" it is

 

they have 2.25, 2.5 and 3.0 ID....

there is no cutting inlvolved, but there will be welding involved

 

Definitely interested in the stainless variety for an '01 prelude...especially if they could include a resonator. Is there any chance we could get an "off-road" version that was extended to the downpipe, eliminating the need for a testpipe??

--Ian

 

Holy caaarawp, good price. Interested.

 

interested also....SS for a 99 prelude SH....SH exhaust is a inch or 2 longer than a base

 

actually an SH exhaust is 3.5" shorter than a base...the header is what's longer.

--Ian