THIS IS A MAJOR PART OUT CHECK THE PICTURES AND SHOOT OFFERS
MY EMAIL IS JOJOAKA420B@AOL.COM




<U>THE ROAD TOO 500++ WHEEL HORSE POWER</U>

my 1999 civic si build project had the car for almost year now and its had a few bumps!! im sure we all hit a few pot holes on the build!!

well this is the motor im build and the parts im using
lower end of the build
1--golden eagle__ sleeved b18c1 block bore out to 84.5mm
2--cometic 85mm head gasket
3--pistons__ are a set of flat top CP's with a comp at 9.7.1
4--rods__ are a set of forged gsr eagle rods
5--eagle light weight chankshaft!!
6--acl bearings on the rods and mains
7--stock integra b18c1 gsr crank girdle
8--stock gsr oil pump with prodrive oil gear
9--stock gsr water pump
10--ACT 6 puck clucth kit with pressure plate
11--ACT street lite 12 pound chromoly steel flywheel
12--moroso 5.5 quart wet sump oil pan
13-- arp b18c head studs

thats the lower half of the motor set up

will be posting some picture as i write about each level of the build


block

pistons





Modified by holset b18c at 10:50 PM 3/4/2008


Modified by holset b18c at 11:19 PM 3/4/2008


Modified by holset b18c at 11:49 AM 3/5/2008


Modified by holset b18c at 1:02 PM 3/5/2008


Modified by holset b18c at 3:02 AM 3/19/2008


Modified by holset b18c at 3:13 AM 3/19/2008


Modified by holset b18c at 3:17 AM 3/19/2008


Modified by holset b18c at 3:18 AM 3/19/2008


Modified by holset b18c at 4:01 AM 3/19/2008


Modified by holset b18c at 9:18 PM 3/21/2008 <U></U>


Modified by holset b18c at 9:23 PM 3/21/2008


Modified by holset b18c at 11:10 AM 4/2/2008


Modified by holset b18c at 11:11 AM 4/2/2008


Modified by holset b18c at 4:27 PM 8/30/2008

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by holset b18c &raquo;</TD></TR><TR><TD CLASS="quote">my 1999 civic si build project had the car for almost year now and its had a few bumps!! im sure we all hit a few pot holes on the build!!

well this is the motor im build and the parts im using
lower end of the build
golden eagle__ sleeved b18c1 block bore out to 84.5mm
cometic 85mm head gasket
pistons__ are a set of flat top CP's with a comp at 9.7.1
rods__ are a set of forged gsr eagle rods
eagle light weight chankshaft!!
acl bearings on the rods and mains
stock integra b18c1 gsr crank girdle
stock gsr oil pump with prodrive oil gear
stock gsr water pump
ACT 6 puck clucth kit with pressure plate
ACT street lite 12 pound chromoly steel flywheel
OBX 5.5 quart wet sump oil pan


thats the lower half of the motor set up

will be posting some picture as i write about each level of the build


block

pistons





Modified by holset b18c at 10:50 PM 3/4/2008


Modified by holset b18c at 11:19 PM 3/4/2008</TD></TR></TABLE>






Modified by holset b18c at 1:03 PM 3/5/2008


Modified by holset b18c at 12:56 AM 3/7/2008

 

baller status y0 ! lol
i wanna see the turbo setup.

 

ok i will list all the turbo parts after the run down on the head!!
i all so need to take picture of all those item!!




Modified by holset b18c at 2:44 PM 3/5/2008

 

the head run down!! its a 2000 integra p72 b18c1 gsr cylinder head!!
that was maxed out with some of the best goods my broke *** could buy!!

14-fresh set of super-tech duel valve springs




15-nice shiny set of super-tech titanium retainers




16-pair of integra type-r camshafts
intake cam & exhaust cam





17-race port and polish on the intake side and
mild port and polish on the exhaust side







18-crower 33.5mm oversize valves
crower 29.5mm oversize nitrite coated
exhaust valves





19- brand new honda valve guide


20- killer 3 angle valve job







Modified by holset b18c at 6:52 PM 3/5/2008


Modified by holset b18c at 3:19 AM 3/19/2008

 

bump!! that super fly head work!! need to find a new chick that can do a head that good!!!

 

DAMM IM BORED friday night got no wheels so im stuck in the house!!! why cuz , some damm mexican crashed into my daily driver!! damm [freak] head!!
well at lease his boss is going to pay for everything!! damm retard was mad drunk and it was only 2pm!!! my poor nissan sentra got smashed by a ford f550!! jerk back right into my whole grill peice!! here are the pictures!!

 

big up!! intake manifold ,turbo manifold pics will be up later !! fuel rail injectors
and throttle body!! set up pictures will be posted

 

PICS ON THE WAY

 

its time !!
21- je edelbrock victor x intake manifold
i cleaned it up with a light polish looks good





22- jg edelbrock 65mm throttle body



23 -custom equel lenght 304l stainless steel ram horn
turbo manifold with t3 flange and 38mm wastegate flange








Modified by holset b18c at 1:14 PM 3/13/2008


Modified by holset b18c at 1:15 PM 3/13/2008


Modified by holset b18c at 3:20 AM 3/19/2008

 

24- nice full set of 3 inch aluminum intercooler
piping with the super strong t-bolt clamps




25 - huge front mount intercooler 31 x 12 x 3




26- full catback 3 inch stainless steel exhaust system



Modified by holset b18c at 1:16 PM 3/13/2008


Modified by holset b18c at 3:20 AM 3/19/2008

 

baller status on everything!!! whered you pick up your full 3'' exhaust?

 

ss auto chrome !! lol aka xs- power!! the only good product they ever made!! hahaha

 

more pics on the way!!! i will post the fuel set up next

 

waiting for my fuel sump!! than the update !!

 

pics of the car !! from **** too much better

 

THANKS UPS!! FOR DROPPING MY FUEL SUMP OFF TODAY!!!
GAS BLAST SET-UP TODAY!!
WITH ALL PICS!! WITH OUT THE FITTINGS

 

car looks good, what kind of lip is that

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by bjones &raquo;</TD></TR><TR><TD CLASS="quote">car looks good, what kind of lip is that</TD></TR></TABLE>


its the mugen style front lip!!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by fullyblown &raquo;</TD></TR><TR><TD CLASS="quote">NIce Build when are you going to have the engine tuned </TD></TR></TABLE>

im trying to buy a s300!! than i can get it tuned by may 1st is my deadline!!

 

the fuel set up

27--a set of 4 pte lucas 880cc injector






28-- str high flow fuel rail



29--paxton Adjustable fuel pressure regulator 1:1 ratio



30--aeromotive a1000 fuel pump




31-- aeromotive fuel filter



32-- competition engineering fuel sump





33-- fram hpg1 racing fuel filter



34--17 feet stainless steel braided hose 10 an feed line



35--15 feet earls braided hose 6 an return line




Modified by holset b18c at 7:59 PM 3/19/2008


Modified by holset b18c at 8:02 PM 3/19/2008

 

THATS THE GAS SYSTEM OF THIS HOT BITCH
BUMP THIS PAGE

 

bump that ****
bump that ****
bump that ****

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by holset b18c &raquo;</TD></TR><TR><TD CLASS="quote">bump that ****
bump that ****
bump that **** </TD></TR></TABLE>

engine management should be the next item!!!
i need that good brain baby!! holla!! hondata s300
what will be next?? maybe a twin plate??? maybe

 

looks good!!! btw what kinda intercooler is that?

hmmm and turbo size and manifold? lol... i might have missed some stuff

-Milon