ive recently picked up a complete y8 head, everything minus the dizzy.

I have been searching around and came up with this list:

-new headgasket(y8? )
-arp head studs(d16a6)
-misc. seals and gaskets
-etc.

-I also came across seeing that some say i can use my d16 dizzy

- I would just like to clarify that because i cant find it for a truthful answer

-I was also informed that there is a two sensor difference between the y8 head and a6 head, what exactly needs done.

- This was off an automatic so i think it will not be useable because of the iacv.. let me kno if im wrong

Thanks for any help in advance

.. Also any websites that i may find helpful, will be appreciated.

 

Find a y8 dizzy, that will bolt right on. you can use a z6 dizzy with a little mod to make it work, I dont think the a6 would work.

 

a6 dizzy will bot right up to the y8 head, to use the a6 dizzy on a z6 you gotta knotch the holes and use washers. Also if you stay obd0 you gotta find something to engage vtec with such as a rpm activated switch from msd or even a shift light works.

 

i figured either looking for a obd0 vtec ecu, or just a vtec controller.. knowing i will need a tune

 

does anyone know about the intake manifold

 

DO NOT USE THE D16A6 ARP HEAD STUDS.

<U>you have to use the special arp kit for swapping the Y8 head!!!!!</U>

You are asking alot of questions that have been answered on here many many times so please............................................ ............................

<U>SEARCH</U>

 

well i cant find anything on obd0, only obd1.. sorry thats why i asked for helpful links instead of answering the questions