JRSC Jackson Racing Supercharger ported by ENDYN B18, B16 16psi
Thread Starter
Honda-Tech Member
Joined: Mar 2006
Posts: 751
Likes: 1
From: Montreal, Quebec, Canada
JRSC Jackson Racing Supercharger ported by ENDYN B18, B16 16psi
Hey guys! I'm preparing my build for this summer, LS/Vtec with jackson supercharger ported by Endyn capable of holding 16psi.
(They basically completely dismantle the charger, port it, and strengthen it so that you can run more boost and keep the intake temperatures low, which equals more power. Endyn charges $1500 to do this mod, and you have to send them your charger, with this setup you can make up to 16lbs of boost.)
People run who've run this setup we're pushing over 250whp and that was at 10lbs of boost.
I bought it last summer here on Honda-Tech. It wasn't used when I bought it and I still haven't used it.
I'm thinking of maybe changing my project (depending if I sell the supercharger or not. Or else I will proceed with it).
The blower is for B18C5 and B16
I was going to run the blower with the LHT intercooler (www.lhtperformance.net)
What happened was I sent the intake manifold to LHT and during the shipping the manifold got stolen/lost, whatever... just LHT performance never received it.
So the blower is missing the intake manifold along with the S-tube.
These parts can be purchased at http://www.supercharger.com
So what I'm selling is:
JRSC ported by ENDYN 16psi comes with high boost 3.8 pulley and a 4 pulley (not yet used)
Intercooler pump from a mustang Cobra (new) for the LHT intercooler
Heat exchanger from a mustang Cobra (used, but still in very good condition)
Custom made Ice/Water reservoir
Everything for $2300 See pics below!
If more pics are required, just ask!
Blower:
Ice Reservoir:
Heat exchanger Mustang Cobra:
Intercooler pump:
(They basically completely dismantle the charger, port it, and strengthen it so that you can run more boost and keep the intake temperatures low, which equals more power. Endyn charges $1500 to do this mod, and you have to send them your charger, with this setup you can make up to 16lbs of boost.)
People run who've run this setup we're pushing over 250whp and that was at 10lbs of boost.
I bought it last summer here on Honda-Tech. It wasn't used when I bought it and I still haven't used it.
I'm thinking of maybe changing my project (depending if I sell the supercharger or not. Or else I will proceed with it).
The blower is for B18C5 and B16
I was going to run the blower with the LHT intercooler (www.lhtperformance.net)
What happened was I sent the intake manifold to LHT and during the shipping the manifold got stolen/lost, whatever... just LHT performance never received it.
So the blower is missing the intake manifold along with the S-tube.
These parts can be purchased at http://www.supercharger.com
So what I'm selling is:
JRSC ported by ENDYN 16psi comes with high boost 3.8 pulley and a 4 pulley (not yet used)
Intercooler pump from a mustang Cobra (new) for the LHT intercooler
Heat exchanger from a mustang Cobra (used, but still in very good condition)
Custom made Ice/Water reservoir
Everything for $2300 See pics below!
If more pics are required, just ask!
Blower:
Ice Reservoir:
Heat exchanger Mustang Cobra:
Intercooler pump:
Re: JRSC Jackson Racing Supercharger ported by ENDYN B18, B16 16psi (R.A.T.)
Did Endyn do any work on the intake manifold & S-tube? Do you have all the mounting hardware?
----- Antony
----- Antony
Trending Topics
Re: (EM2Civic)
I doubt you want to do this, but are you willing to part with just the blower? Im going a similar route you were, going to be sending my manifold to LHT for the intercooler and such and have a stock blower that im debating on using or rebuilding.
