I searched and didnt quite find what i was looking for. I found numerous bay pics in the archives but they didnt picture exactly what i was looking for. I also searched the online parts places that have the exploded parts view, but they were either unclear or too small .

Pics of the following would be much appreciated (must be from a '97R):

-Underhood vacuum/emissions decal.
-Charcoal canister and where the vac lines go to.

Thanks in advance to anyone who helps me out.

 

I thought they were all the same whene it come to the engine bay. But i hope this helps

I'll try to take a closer picture of the underhood diagram later if there isn't one when i get back

 

helms manual:
http://downloads.hondatech.inf...l.zip

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CWTegRNo.160 &raquo;</TD></TR><TR><TD CLASS="quote">I thought they were all the same whene it come to the engine bay. But i hope this helps

I'll try to take a closer picture of the underhood diagram later if there isn't one when i get back</TD></TR></TABLE>

Well the 98 + cars i believe have the purge vent valve mounted on top of the canister, whereas the 97's dont. That would affect the way the hoses are routed. I really need upclose pics of the charcoal canister area showing the canister itself as well as where its hoses go, from a '97 preferrably, but later years would be of some help i guess.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by eg6ajk &raquo;</TD></TR><TR><TD CLASS="quote">

helms manual:
http://downloads.hondatech.inf...l.zip</TD></TR></TABLE>

I believe i already d/l that. Problem being is that the hondatech.info site or whatever did NOT have an Integra '97 model listed. They only had 98-01 and 90-93. Go figure.

 

Here is Madspeed's old 97 ITR.

 

They sent you to state reff?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Spids5 &raquo;</TD></TR><TR><TD CLASS="quote">Here is Madspeed's old 97 ITR.

</TD></TR></TABLE>

Thx, but all i can get from the birds eye view shot is the purge routing and mounting. I need those upclose shots.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 98itRspec &raquo;</TD></TR><TR><TD CLASS="quote">They sent you to state reff?</TD></TR></TABLE>

No ticket, but i am trying to REF an obd2 type r swap in my '89 hatch, and im going for the '97 spec due to the 97's not having the purge vent valve (dont confuse that with the firewall mounted purge) or the gas tank pressure sensor. The '97 seems to be easiest of all the obd2 years, and obviously it was the first year the type r was offered in the states. I have ref experience but thats all with obd1 cars that ive done.

Im trying to see whether or not i need to run a 97 integra charcoal canister and how those hoses are routed.

I also need to mount up the underdash DLC, so if anyone has a Helms for a 1997 integra that would be sweet and could help me out a ton. All these online Helms dowloads are for 98+ !!

 

1997 USDM ITR Vacum Hose Diagram on the hood:



And the charcoal canister hook ups (helps if theres no engine in the way I guess ):

 

Thats exactly what i was looking for!

So it looks like i will need to get a 97 charcoal canister. Luckily its not type r specific according to the part numbers.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by fourthgenhatchB17 &raquo;</TD></TR><TR><TD CLASS="quote">
So it looks like i will need to get a 97 charcoal canister. Luckily its not type r specific according to the part numbers.

</TD></TR></TABLE>

Yeah I wouldnt think thered be a special charcoal canister for the ITRs. Now if you can tell me what that thing actually does and how it works then this will be a great trade of information. Lolz, no one seems to know for sure and I havent ever gotten two of the same answers.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by KOALA YUMMIES &raquo;</TD></TR><TR><TD CLASS="quote">

Now if you can tell me what that thing actually does and how it works then this will be a great trade of information. Lolz, no one seems to know for sure and I havent ever gotten two of the same answers. </TD></TR></TABLE>

http://www.freepatentsonline.com/4112898.html

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by cmdr430 &raquo;</TD></TR><TR><TD CLASS="quote">

http://www.freepatentsonline.com/4112898.html</TD></TR></TABLE>

Ahhh thanks. Makes sense now! Thanks

I Pmed you back fourthgenhatch, but for clarification the thicker hose does not connect to the cannister, its the hose from the heater core and I just stuck it back there while the motor is out.