F/S 93 Civic Hatchback
#1
Junior Member
Thread Starter
Join Date: May 2004
Location: Greenville, SC, USA
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
F/S 93 Civic Hatchback
Im selling my 93 Hatchback w/ all motor sohc w/ extras.
Primer Black exterior very clean.
03 Civic seats
Extremely clean Black Interior perfect.
Engine:
D16Z6 Block w/ P29 Pistons
- Compression = 280,285,285,290 (13.7:1)
- Balanced crank and rods
- ACL bearings
- Turbo Nitrous Rings
- Metal headgasket
D15B JDM Head (Slight Port)
- Comp Stage 1 Cam
- New Valves and Springs
- Spoolin Performance Intake manifold w/ Velocity Stacks
- AEM Fuel Rail
- DSM 450CC Injectors w/ resistor box
- AEM Throttle Body
- 3" Ram Air Intake
95 Civic Si Trans ( less than 6 months old)
- Stage 2 Clutch
- Stage 3 Pressure Plate
Full Stainless Steel 3" Exhaust
Newspeed Springs
Apexi VAFC2
ProSport Gauges Amber
- Digital Oil Pressure
- Digital A/F (Wide)
Si Gauge Cluster Amber lights
P28 ECU
Megan Short Shifter
Type R Shift Boot
Also have CP Turbo Pistons and Rings for Turbo Setup
If interested i have full EX doors w/ PW,Power door locks and full harness.
Pics SOON
Trades open too DC Integra or S14 240SX.
Here are some current pics, Car is primed in Flat black because i was getting the body cleaned up and ready for new paint.
Pics from the engine build and Before the paint prep:
I just like the way this picture looks.
IMG]http://i93.photobucket.com/albums/l53/VigiB/HouseHaydnPics044.jpg[/IMG]
Engine w/ High Compression Pistons
JDM Head w/ Cam Installed
Oh ya here is my turbo kit on the car.
Here is what my plan for the car was
Modified by vib at 12:50 AM 1/24/2008
Modified by vib at 1:44 AM 2/13/2008
Primer Black exterior very clean.
03 Civic seats
Extremely clean Black Interior perfect.
Engine:
D16Z6 Block w/ P29 Pistons
- Compression = 280,285,285,290 (13.7:1)
- Balanced crank and rods
- ACL bearings
- Turbo Nitrous Rings
- Metal headgasket
D15B JDM Head (Slight Port)
- Comp Stage 1 Cam
- New Valves and Springs
- Spoolin Performance Intake manifold w/ Velocity Stacks
- AEM Fuel Rail
- DSM 450CC Injectors w/ resistor box
- AEM Throttle Body
- 3" Ram Air Intake
95 Civic Si Trans ( less than 6 months old)
- Stage 2 Clutch
- Stage 3 Pressure Plate
Full Stainless Steel 3" Exhaust
Newspeed Springs
Apexi VAFC2
ProSport Gauges Amber
- Digital Oil Pressure
- Digital A/F (Wide)
Si Gauge Cluster Amber lights
P28 ECU
Megan Short Shifter
Type R Shift Boot
Also have CP Turbo Pistons and Rings for Turbo Setup
If interested i have full EX doors w/ PW,Power door locks and full harness.
Pics SOON
Trades open too DC Integra or S14 240SX.
Here are some current pics, Car is primed in Flat black because i was getting the body cleaned up and ready for new paint.
Pics from the engine build and Before the paint prep:
I just like the way this picture looks.
IMG]http://i93.photobucket.com/albums/l53/VigiB/HouseHaydnPics044.jpg[/IMG]
Engine w/ High Compression Pistons
JDM Head w/ Cam Installed
Oh ya here is my turbo kit on the car.
Here is what my plan for the car was
Modified by vib at 12:50 AM 1/24/2008
Modified by vib at 1:44 AM 2/13/2008
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
turbo-sohc 380WHP
Vehicles for sale
7
07-31-2008 04:39 PM
my2kgsr
Vehicles for sale
41
03-16-2008 02:13 PM