so I want to do a da cluster in my ef DUH !! but I dont know about the wireing, I mean I wish that they had a DA CLUSTER IN EF FOR DUMMIES book but I havent found anything so can anyone tell me which wires go were and would I have to change the vss to get everything running thanks !

MERRY X MAS !!!!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by misha &raquo;</TD></TR><TR><TD CLASS="quote">for those who still are stocked on the DA cluster:


<FONT SIZE="2"><FONT COLOR="red">[B]DA PINS:[B]</FONT></FONT>

PIN...Wire Color...Wire Function
A1...Yellow/Red...Seat Belt Reminder Light
A2...Green/Red...Parking Brake Switch Light
A3...Green/Black...Hatch Open Indicator Light
A4...Green/Red...Low Fuel Indicator Light
A5...Yellow/White...Fuel Gauge
A6...Yellow/Red...ECM, Trans Control, Moduel TCM, Cruise Unit, VSS
A7...Red Gauge...Lights, Dash Light Dim
A8...Empty
A9...Red/Black...Gauge Lights
A10...Green/Yellow...Right Turn Signal Indicator

B1...Green/Blue...Left Turn Signal Indicator
B2...Red/Blue...High Beam Indicator
B3...Blue/Red...ABS Indicator Light
B4...Blue...Tachometer
B5...Green/Red...Door Open Indicator Light
B6...Yellow/Green...Engine Coolant Temp Gauge
B7...Black...Ground
B8...Yellow...Ignition Power
B9...Green/Orange...Malfunction Indicator (Ck Eng.) Light
B10...Black/Yellow...Charging Sysem
B11...White/Blue...Charging System (Battery) Light
B12...Yellow/Red...Low Engine Oil Pressure Light

C1...Red...Cruise Control Unit
C2...Red/Black Gauge Lights...Cruise Control Dimming Circuit
C3... Empty

<FONT SIZE="2"><FONT COLOR="blue">[B]EF PINS:[B]</FONT></FONT>


1. Left Turn ---- (Green/Blue)
2. High Beam ---- (Red/Blue)
3. Coolant Temp -- (yellow/Green)
4. Dash Brightness ----- (Red)5. Gauge Lights ----- (Red/Black)
6.
7. E-Brake ---- (Green/Red)
8. Oil Pressure --- (yellow/red)
9. Check Engine Light ---- (Green/Orange)
10. 12v Power ---- (Black/Yellow)
11. Battery/Alternator Light ---- (White/Blue)
12. Tachometer --- (Blue)

1. Ground ---- (Black)
2.
3.
4. Trunk ---- (Green/Black)
5. Seat Belt ---- (Blue/Red or Blue/yellow)
6. Fuel Gauge --- (Yellow/White)
7. 12v Power ---- (Yellow)
8. Right Turn --- (Green/Yellow)

</TD></TR></TABLE>

thank Misha

 

make sure you have the pigtails to the da cluster to do the wire macthing, and you will have to extend the ground wire from the EF 1-8 pins from harnes to the left DA b1-b12 pins pigtail, and a few others if im correct

 

ok let me see if I get the wireing right

( going form ef to da wires)

a1- b1
a2 b2
a3 b6
a4
a5 a9
a6
a7 a2
a8 b12
a9 b9
a10 ??? NO IDEA WHERE THIS GOES
a11 ??? no idea where this goes
a12 b4


b1 B7
b2 empty
b3 empty
b4 A3
b5 A1
b6 A5
b7 ??? NO IDEA WHERE THIS GOES
b8 a10