Ok so I have gone thru 2 auto trannys messing up on me...

So to make a long story short i have been collecting parts to do the 5 speed swap...I have everything to do the swap but the clutch, flywheel, and the auto to manual mount...The tranny im using is a ys1 gsr trans

ok so less talkin i kno u guys want some pics....

linkage


manual ecu


flywheel bolts


rear bracket


clutch cable


pedal assembly


And just for fun Power folding mirrors


And i couldnt leave you guys without a pic of my car...


PS...If anyone in my area would like to help out your more then welcome...thanks

since its the holiday season the build will be slow progress

 

looks good...my old hatch is being stored in vineland

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by speedooo &raquo;</TD></TR><TR><TD CLASS="quote">looks good...my old hatch is being stored in vineland</TD></TR></TABLE>

Thanks...Really where are you from?

 

are those used flywheel bolts?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by blackANESE &raquo;</TD></TR><TR><TD CLASS="quote">are those used flywheel bolts?</TD></TR></TABLE>

yes they are from my boy..he had them from his old DA

 

iiite finally makin it 5 speed bump

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ...:::MaRk:::... &raquo;</TD></TR><TR><TD CLASS="quote">iiite finally makin it 5 speed bump</TD></TR></TABLE>

Ha yeah...its been a long wait...but im not in a rush

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RenzoDaPlayboi &raquo;</TD></TR><TR><TD CLASS="quote">

yes they are from my boy..he had them from his old DA</TD></TR></TABLE>
baaaaaaaaaaad idea. get ready to have a loose flywheel.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by blackANESE &raquo;</TD></TR><TR><TD CLASS="quote">
baaaaaaaaaaad idea. get ready to have a loose flywheel.</TD></TR></TABLE>

Nah, just torque them to spec and you'll be fine.

I've replaced more clutch/flywheels than I can count(some as a tech at a Honda dealer). I've never replaced bolts, unless they got mangled.
I have reused the same bolts in my personal car 3-4 times.
Never had a single problem.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by blackANESE &raquo;</TD></TR><TR><TD CLASS="quote">
baaaaaaaaaaad idea. get ready to have a loose flywheel.</TD></TR></TABLE><TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Slopoke &raquo;</TD></TR><TR><TD CLASS="quote">

Nah, just torque them to spec and you'll be fine.

I've replaced more clutch/flywheels than I can count(some as a tech at a Honda dealer). I've never replaced bolts, unless they got mangled.
I have reused the same bolts in my personal car 3-4 times.
Never had a single problem.</TD></TR></TABLE>

Yeah thanks...Thats what i thought...I didnt think people change their flywheels bolts everytime they get the flywheel resurfaced...Thanks for the input though

 

Have fun cheaping out over $25

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by blackANESE &raquo;</TD></TR><TR><TD CLASS="quote">Have fun cheaping out over $25 </TD></TR></TABLE>

Thanks for your comments

 

I will be starting tomorrow morning if it doesnt rain...Since my father is a garage hog

 

Have fun wiring up the power folding mirrors.. those are a PITA
GL w/ the build man

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Leo C &raquo;</TD></TR><TR><TD CLASS="quote">Have fun wiring up the power folding mirrors.. those are a PITA
GL w/ the build man </TD></TR></TABLE>


Lol i was just reading a how to article on them...

It seems to break it down pretty good

 

nice aquas an dgood luck on the swap

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sLoWrAcEr &raquo;</TD></TR><TR><TD CLASS="quote">nice aquas an dgood luck on the swap </TD></TR></TABLE>

Thanks for the support...Im gettin the playoff 8's tonight stay tuned!

 

werd me too lol my boys getting me them on monday tho lucky!

 

i aint got no update yet...but i got these the other night!

 

New Jersey FTW!

 

I am in the process of wiring my jdm folding mirrors...I have 2 wires from each mirror and one wire of which i added to the harness...The relay has 5 wires on it...I am wondering if i can just wire the 5 wires in any order...or if they have to be specific

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RenzoDaPlayboi &raquo;</TD></TR><TR><TD CLASS="quote">

Thanks for the support...Im gettin the playoff 8's tonight stay tuned!</TD></TR></TABLE>

Yes sir we will...

 

damn car looks good and 5speed is nice

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Brice.Hayden &raquo;</TD></TR><TR><TD CLASS="quote">damn car looks good and 5speed is nice </TD></TR></TABLE>

thanks man...i appreciate it

Can anyone help me wit the jdm mirrors? im stuck..

 

goodluck w/ the build.... nice VIII's