As requested, Buddy Club Spec III pictures
Here you guys go...
Also, I did take two mpegs at idle if anyone is interested. Please IM me with your e-mail address and I will get them to you


Also, I did take two mpegs at idle if anyone is interested. Please IM me with your e-mail address and I will get them to you



seem like the tip is sticking out a lot!!!
Jason-
who knows his chit is LONG
Trending Topics
Jason, correct me if I'm wrong, but didn't you have a Black R? What happened to it? I thought you had both a Yellow and Black R but you sold the yellow?
Thanks Jason... after some slight refabrication I was able to get mine lined up. But I don't think mine sticks out quite as far? The BuddyClub logo is just visible past the bumper if looking straight down. I'll IM you for the mpegs.... Thanks again.
Jason, correct me if I'm wrong, but didn't you have a Black R? What happened to it? I thought you had both a Yellow and Black R but you sold the yellow?
You didn't modify it at all? I was under the impression that since it was a JDM exhaust you needed to chop off like 3 inches for it to be the same length as USDM exhausts. David at R&D mentioned that.
Jason, correct me if I'm wrong, but didn't you have a Black R? What happened to it? I thought you had both a Yellow and Black R but you sold the yellow?
Jason's been through nine Type R's already
Jason's been through nine Type R's already
Even if he shorten the the midpipe to fit the North American spec vehicles, the tip will stick this far out. The rear hangars for the rear muffler will always be sitting in the same position, so there is nothing he can do unless he alters the rear hangars and shorten the rear section piping to make the exhaust stick in a bit. Shortening the midpipe will only correct the fitment of the mdi pipe to the cat, leaving only very minimal movement in the rear section.
The conclusion is, alterations is needed. This is the same for 5zigen since 5zigen does produce mufflers for Buddy Club.
The conclusion is, alterations is needed. This is the same for 5zigen since 5zigen does produce mufflers for Buddy Club.




Drinker