Hey all,

Anyone ever used the 92-95 Civic IC piping kit from GReddy? MSRP is 200, I can get it for 150, which is cheaper than JCW pipes and buying clamps and whatnot else where. I am just concerned about if it is complete or not, and how well it work with a custom setup and motor swaps. Is there enough pipe to allow custom cutting, etc?

The poeple at Greddy didnt seem to know shiat about, they said its an item that they usually do not stock.

 

I would like to know too. What's the diameter of the piping?

 

Just found out it's 60mm from TB to IC, not sure on turbo to IC.

 

I had one, it's 50mm from the turbo to the IC then 50mm from the IC and changes up to 60mm before the TB. Only the upper pipe is 60mm if I remember right.

The kit is a pain in the *** if you are not using the Greddy kit or a similar setup. I sold mine and did it all custom.

 

And also, it's not a full set of piping. It requires you to have the greddy turbo and ic to not have to add any piping. Otherwise, you're up the creek.

 

yeah, I thought it was just to convert a non-intercooled greddy kit to an intercooled kit?

 

Thats why you should get the Greddy IC kit. it comes with pretty much
all the piping except for the one bend from the turbo.

 

the ic piping kit assumes you already have all the pipes that come with the Intercooler.

 

Umm, no. you are mistaken.