TDM Miracle Style X-Bar (Cross Bar) Blow Out Sale for the DC Integra & EK Civic
Miracle Style X-Bar (Cross Bar) Blow Out Sale for the DC Integra & EK Civic
***UPDATE***
*** SPECIAL*** USE COUPON CODE "10KK" TO RECEIVE 10% OFF YOUR ENTIRE WEBSITE ORDER AND FREE SHIPPING TO THE LOWER 48 STATES!!!
You may order directly through our secure website at www.privatelabelmfg.com
(PLEASE NOTE: WEBSITE PRICING AND FORUM PRICING MAY DIFFER. PM FOR FORUM PRICING!)
You may order directly through our secure website at www.privatelabelmfg.com
(PLEASE NOTE: WEBSITE PRICING AND FORUM PRICING MAY DIFFER. PM FOR FORUM PRICING!)
X-BARS ARE NOW BACK IN STOCK!!!
We have them available for the following applications:
EK9
EG6
DC2
S13
Each set is complete with X-Bar, C-Pillar bar, Strut bar & Butterfly side bars.
NOTE: These will only be available as a full set. We will not be selling individual pieces.
PRICE FOR THE X-BAR IS $300 SHIPPED FOR THE COMPLETE SET!
__________________________________________________ _____________________________________
The Basics:
• utilizes the c-pillar and strut points to decrease body flex during hard cornering
• maximizes 4 critical points of the chasis to 1 stress point
• While having a stylish look to your car where no has had at an affordable price
made of SUS304 stainless stainless steel (aircraft steel)
• utilizes rear seats(for most applications)
• Improvement is undeniable, you will feel the difference instantly when installed
for maximum rigidity
• Made of high grade aircraft SUS304 stainless steel(18 gauge).
__________________________________________________ _____________________________________
***UPDATE****
EG6 X-Bar set.
Complete set with X-Bar, C-Pillar, Strut & Side bars.
DC2 X-Bar set.
EK9 X-Bar set.
S13 X-Bar set.
WELDS
They ship out fully assembled and ready to install directly into your vehicle. Limited quantity available! Introductory sale price is set at $300 w/ shipping included to the lower 48 states.
PM for orders!
__________________________________________________ ________________________________
**FREE FedEx Shipping on ALL ORDERS!***
Paypal ID : TDMPRODUCTS@SBCGLOBAL.NET
***CONFIRMED ADDRESSES ONLY***
__________________________________________________ ________________________________
For more information PM me or send me an email at TDMproducts@sbcglobal.net or reply to the thread and I'll have your answers ASAP
PAYPAL PAYMENTS TO: TDMPRODUCTS@SBCGLOBAL.NET
***CONFIRMED ADDRESSES ONLY***
---Contact Info---
Email: Tdmproducts@sbcglobal.net
Paypal:Tdmproducts@sbcglobal.net (Confirmed Address Only)
Last edited by TDM Products; Dec 3, 2013 at 12:38 AM.
Joined: Aug 2002
Posts: 16,062
Likes: 0
From: Bay Area Strong, ca
Re: (The Lobster)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by The Lobster »</TD></TR><TR><TD CLASS="quote">hi does this retain EK rear seats?</TD></TR></TABLE>
yes u can have the rear seats still in the car
yes u can have the rear seats still in the car
Trending Topics
Re: (TDM Products)
<FONT SIZE="3">***FREE FEDEX SHIPPING***</FONT>
Get your X-Bars Today!
Ships Daily Mon-Fri
Paypal ID: tdmproducts@sbcglobal.net
Confirmed Address Only
Modified by TDM Products at 2:12 PM 9/28/2007
Get your X-Bars Today!
Ships Daily Mon-Fri
Paypal ID: tdmproducts@sbcglobal.net
Confirmed Address Only
Modified by TDM Products at 2:12 PM 9/28/2007
Re: (TDM Products)
[b]Attention: All orders made on Fridays will be shipped out at 4pm and should arrive on Mon - Tues[b]
***Free FedEx Shipping***
Order Today!!
Modified by TDM Products at 2:13 PM 9/28/2007
***Free FedEx Shipping***
Order Today!!
Modified by TDM Products at 2:13 PM 9/28/2007
Re: (Smokinsax)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Smokinsax »</TD></TR><TR><TD CLASS="quote">+1 for the ED chassis!!!</TD></TR></TABLE>
I say make a poll and see how many people we can get to support the ED Chassis..If you can get me 50 people i could produce 1 for the ED Chassis.
Make a thread and i'll subscribe to it and hopefully enough people are interested.
I say make a poll and see how many people we can get to support the ED Chassis..If you can get me 50 people i could produce 1 for the ED Chassis.
Make a thread and i'll subscribe to it and hopefully enough people are interested.
The Boot
Joined: Dec 2001
Posts: 9,841
Likes: 0
From: Arizona, US
Re: (TDM Products)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TDM Products »</TD></TR><TR><TD CLASS="quote">If you can get me 50 people i could produce 1 for the ED Chassis.</TD></TR></TABLE>lol...never mind. 
Re: (integlspwr2k)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by integlspwr2k »</TD></TR><TR><TD CLASS="quote">nothing for 4dr integra?</TD></TR></TABLE>
Nope just the EKs and the 2door DCs sorry
Nope just the EKs and the 2door DCs sorry
The Boot
Joined: Dec 2001
Posts: 9,841
Likes: 0
From: Arizona, US
Re: (integlspwr2k)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by integlspwr2k »</TD></TR><TR><TD CLASS="quote">nothing for 4dr integra?</TD></TR></TABLE>make a poll and see how many people we can get to support the 4dr integra..If you can get me 50 people i could produce 1 for the 4dr integra. 
Re: (Smokinsax)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Smokinsax »</TD></TR><TR><TD CLASS="quote">make a poll and see how many people we can get to support the 4dr integra..If you can get me 50 people i could produce 1 for the 4dr integra.
</TD></TR></TABLE>
words right outta my mouth lol
</TD></TR></TABLE>
words right outta my mouth lol
Re: TDM Miracle Style X-Bar (A's 94 GSR)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by A’s 94 GSR »</TD></TR><TR><TD CLASS="quote">Awesome deal. Do you have a shot of the bar cut in half. I'd like to see the ridgedness (sp?)</TD></TR></TABLE>
Nope sorry to say but we don't have one cut in half actually that would be bad for us if we did have one that was in half lol..
Nope sorry to say but we don't have one cut in half
actually that would be bad for us if we did have one that was in half lol..
The Boot
Joined: Dec 2001
Posts: 9,841
Likes: 0
From: Arizona, US
Re: TDM Miracle Style X-Bar (ma_rio44)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ma_rio44 »</TD></TR><TR><TD CLASS="quote">how about for the eg hatch??? do you make it for that car???</TD></TR></TABLE>seriously...expand your products already!!!!
Re: TDM Miracle Style X-Bar (Smokinsax)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Smokinsax »</TD></TR><TR><TD CLASS="quote">seriously...expand your products already!!!! </TD></TR></TABLE>
Haha yea we've been lookin in the EG department for awhile now and I believe thats our next line for the Xbar EG Chassis. These things take time due to actual design, fitment..testing and last but not least the actual manufacturer. but we've already done the R&D for the EG Chassis and sometime soon will have 1 for the EG Chassis
Will provide more info on that when i get more info Thanks for waitin
</TD></TR></TABLE>Haha yea we've been lookin in the EG department for awhile now and I believe thats our next line for the Xbar EG Chassis. These things take time due to actual design, fitment..testing and last but not least the actual manufacturer. but we've already done the R&D for the EG Chassis and sometime soon will have 1 for the EG Chassis
Will provide more info on that when i get more info Thanks for waitin
BG-33P
Joined: Aug 2005
Posts: 6,038
Likes: 0
From: Carroll County, Maryland, United States
Re: TDM Miracle Style X-Bar (TDM Products)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TDM Products »</TD></TR><TR><TD CLASS="quote">Nope sorry to say but we don't have one cut in half actually that would be bad for us if we did have one that was in half lol.. </TD></TR></TABLE>
Well is it hollow, solid, or a crossbeam inside?
actually that would be bad for us if we did have one that was in half lol.. </TD></TR></TABLE>Well is it hollow, solid, or a crossbeam inside?