TESTING WATERS AS WHOLE NO PART OUT. email sylkdog13@netscape.net aim: sylliecat16

[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
About my Ride
92 civic cx
engine: darton sleeved d16y8
wiesco 9:1 pistons
eagle h beams
acl bearings
toga hv oil pump
arp head studs
oem head gasket
d16y8 head mild port& polish
zex 105300
full supertech valvetrain w/ .5 black nitrated oversized valves
edelbrock victor X
bdl 68mm throttle body
plx wideband O2 with display
rc 650 injectors
walbro 255 lph fuel pump
bdl fuel rail/fpr
act stage 3 clutch kit
d16y8 trans obx lsd
gator custom 500hp axles
perscion sc61 .63 a/r
AFI EL mainfold
AFI 3in dp
tial 38 mm wastegate w/ 1.5 in dump tube running down under oil pan
2.5 custom piping to apexi n1
turbo xs dual stage boost controller
ec-tuned
2.5in custom ic piping
12" intercooler
skunk 2 drag springs
kyb agx shocks
drag dr20 w/ bf goodridge drag raials/falken azenis rt-615 205/50/15

 

Sexy Clean And Fresh
Bump For A Local

 

sell me the shell

 

wanna trade? figured i ask. look me up and let me know

 

evobassfish......... hit me up @ 609-372-5085 or on myspace.

http://profile.myspace.com/ind...30339

bump still taking offers

 

 

ttt

 

do u have a ballpark price on what your looking to get?

 

$8000 or best offer

 

nice hatch

 

Ill trade you for my stone white srt4 05 34k miles clean pa title, rolling chasis

 

thankx

 

no thanks

 

bump nice egg

 

thanks bump

 

So is the car on EBAY now?? If not then this look crazy like it.

http://cgi.ebay.com/ebaymotors...28970

 

yea its on ebay too

 

bump for a great build..

 

thanks bump taking more offers

 

pm'd lmk

 

pmed

 

ttt

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by b18_ef_hatch &raquo;</TD></TR><TR><TD CLASS="quote">

Can anyone verify these are darton sleeves? I have a set in my z6 and those look stock to me?? Thanks for any help </TD></TR></TABLE>



they are stock sleeves. you can easily tell. look its all aluminum on the outside of the sleeves. look about one inch down the waterjacket between the cylinders and you can tell from top they are all connected together. sounds like whoever did the work for that kid screwed him hardcore.

they are not dartons. i have a pic of my darton sleeved d16 if you would like to use for reference.


edit: here is my darton sleeved block. notice where you can see between each sleeve that they are seperate individual sleeves? and how there isnt aluminum on the outside of the sleeves? and how they are a little bit thicker..

 

mike93eh2 leave a positive comment or dont leave one at all. for your information i have researched this also because they do look alot diffent from other sleeves i've seen. i posted it as a question and this is wat i got:

https://honda-tech.com/zerothread?id=1596587

i then called darton and sent them pictures and they confirmed that they are darton replacement sleeves good for 500+hp. i have the recipt in hand.

if your no doing to buy do not post. thanks

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by d16z6Tcrx &raquo;</TD></TR><TR><TD CLASS="quote">mike93eh2 leave a positive comment or dont leave one at all. for your information i have researched this also because they do look alot diffent from other sleeves i've seen. i posted it as a question and this is wat i got:
https://honda-tech.com/zerothread?id=1596587

i then called darton and sent them pictures and they confirmed that they are darton replacement sleeves good for 500+hp. i have the recipt in hand.

if your no doing to buy do not post. thanks
</TD></TR></TABLE>

THEY ARE STOCK REPLACEMENT SLEEVES, YES.

you are just advertising them as "darton sleeved"
almost everyone is going to think its really sleeved. which it is not.

better change your for sale ad so people arent misleaded.