Where do I buy wheel spacers and what size do you recommend?
Thread Starter
Honda-Tech Member
Joined: Jul 2001
Posts: 2,022
Likes: 0
From: Palm Coast, FL, USA
Where do I buy wheel spacers and what size do you recommend?
I have 13x6 Wheels with 22x13x8 M & H Slicks. The tires are slightly rubbing the upper control arm. What size spacers would you recommend and where can I get them? I put my slicks on and couldn't even run with em 
I am in need of 12's
Thanks,
Miguel
I am in need of 12's
Thanks,
Miguel
Honda-Tech Member
Joined: Sep 2001
Posts: 12,978
Likes: 1
From: Reading, PA, usa
Re: Where do I buy wheel spacers and what size do you recommend? (SIINSI)
any auto parts store or wheeldirect.com or something like that , any real wheel place will have em or can get em
New User
Joined: Dec 2000
Posts: 1,942
Likes: 0
From: Skunk2, rulez
Re: Where do I buy wheel spacers and what size do you recommend? (itr206)
dude i have a set of spacers for bogart rims. they bolt onto the back with hex screws. they are 1/2 in thick. make me a decent offer. i can get pics to u if you are interested.
New User
Joined: Dec 2000
Posts: 1,942
Likes: 0
From: Skunk2, rulez
Re: Where do I buy wheel spacers and what size do you recommend? (SIINSI)
they'll work on any but if you have bogarts they bolt up to the rim which is nice.
what's real nice is that they are made out of machined aluminum so they are light as hell too. In addition they'll fit any I almost hate sell em in case i ever need em again..
[Modified by FAST94GSR, 4:40 PM 6/7/2002]
what's real nice is that they are made out of machined aluminum so they are light as hell too. In addition they'll fit any I almost hate sell em in case i ever need em again..
[Modified by FAST94GSR, 4:40 PM 6/7/2002]
Thread Starter
Honda-Tech Member
Joined: Jul 2001
Posts: 2,022
Likes: 0
From: Palm Coast, FL, USA
Re: Where do I buy wheel spacers and what size do you recommend? (FAST94GSR)
Are these 4x100? I really don't know what they go for, IM me with a price if ya can. Also, are these all I will need?
Are these the spacers? http://www.exospeed.com/dragwheels.htm
Thanks,
Miguel
[Modified by SIINSI, 5:07 PM 6/7/2002]
I really don't know what they go for, IM me with a price if ya can. Also, are these all I will need?Are these the spacers? http://www.exospeed.com/dragwheels.htm
Thanks,
Miguel
[Modified by SIINSI, 5:07 PM 6/7/2002]
Honda-Tech Member
Joined: Jan 2002
Posts: 3,539
Likes: 0
From: south of NOVA
Re: Where do I buy wheel spacers and what size do you recommend? (SIINSI)
Are these 4x100? I really don't know what they go for, IM me with a price if ya can. Also, are these all I will need?
Are these the spacers? http://www.exospeed.com/dragwheels.htm
Thanks,
Miguel
i thought H&R made spacers...?
nice pic of strong bad
[Modified by SIINSI, 5:07 PM 6/7/2002]
I really don't know what they go for, IM me with a price if ya can. Also, are these all I will need?Are these the spacers? http://www.exospeed.com/dragwheels.htm
Thanks,
Miguel
i thought H&R made spacers...?
nice pic of strong bad
[Modified by SIINSI, 5:07 PM 6/7/2002]
Trending Topics
Honda-Tech Member
Joined: Jun 2001
Posts: 2,443
Likes: 0
From: On the coast, with my feet in the sand
Re: Where do I buy wheel spacers and what size do you recommend? (SIINSI)
i bought my 0.25" wheel spacers at pep boys for about $5 each. my hx rims would rub the caliper of my SI-R suspension and after putting on the spacers, that cured the problem. but, i did buy longer wheel studs as well for safety.
Honda-Tech Member
Joined: Mar 2002
Posts: 6,093
Likes: 0
From: Anaheim, CA, USA
Re: Where do I buy wheel spacers and what size do you recommend? (Si Boi)
If you buy bogarts, the actual rim is made for the spacer. Was it rubbing full of air? Cause if you get it down to about 10 pounds or below, they might stop rubbing. And yes, those wheels are not wide enough at 6 inches. If its just rubbing a little bit, maybe smooth out the area where its rubbing to give it a little more clearance....mike
Thread
Thread Starter
Forum
Replies
Last Post
