Neuspeed rear sway bar owners...pictures of yours bolted up (no instru & pile of hardware)
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Oct 2004
Posts: 1,007
Likes: 1
From: NOVA, usa
Neuspeed rear sway bar owners...pictures of yours bolted up (no instru & pile of hardware)
Topic is self explicative of body but here goes again: I bought a Neuspeed rear sway bar off a buddy and have no instructions for it. Hardware kit consist of somethin like 25 washers and various length bolts, larger and smaller nuts. Can anyone post a picture of the bar connected to the control arm area?
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Oct 2004
Posts: 1,007
Likes: 1
From: NOVA, usa
Re: Neuspeed rear sway bar owners...pictures of yours bolted up (Autoworks)
ahh...I suppose those two extra brackets are to be able to bolt the bar to the shock mount area. Is this necessary if you have 91 CRX Si LCAs?
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Oct 2004
Posts: 1,007
Likes: 1
From: NOVA, usa
Re: Neuspeed rear sway bar owners...pictures of yours bolted up (Crx Jimmy)
Yea I had noticed that. I just knew he had pics of some bar mounting up...used to be his avatar. I was hopin for pics from the other side. Now that I think about it though it would be pretty hard to get a camera up in there. Crap I don't want to bolt this thing up wrong 
Honda-Tech Member
Joined: Jan 2004
Posts: 11,129
Likes: 36
From: GO AUTOWORKS DOT COM
Re: Neuspeed rear sway bar owners...pictures of yours bolted up (Creator)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Creator »</TD></TR><TR><TD CLASS="quote">Yea I had noticed that. I just knew he had pics of some bar mounting up...used to be his avatar. I was hopin for pics from the other side. Now that I think about it though it would be pretty hard to get a camera up in there. Crap I don't want to bolt this thing up wrong </TD></TR></TABLE>
I"ll try to take some frontal shots tommorrow...I just have to jack my car up
</TD></TR></TABLE>I"ll try to take some frontal shots tommorrow...I just have to jack my car up
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Oct 2004
Posts: 1,007
Likes: 1
From: NOVA, usa
Re: Neuspeed rear sway bar owners...pictures of yours bolted up (Autoworks)
I'm impatient so here's how it ended up
Everything is loose in the picks. So things will straighten up once I tighten it all up. If it's wrong I'll have to go back and fix on Friday. Thanks for the input though guys
Everything is loose in the picks. So things will straighten up once I tighten it all up. If it's wrong I'll have to go back and fix on Friday. Thanks for the input though guys
Trending Topics
Honda-Tech Member
Joined: May 2006
Posts: 1,395
Likes: 0
From: hiding in the sticks in pa
Re: Neuspeed rear sway bar owners...pictures of yours bolted up (Creator)
are any of you guys running 3 inch exhaust and a rear sway bar? ive been wanting a rear sway bar but i have 3 in on my sedan and i dont know if there will be enough room
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Oct 2004
Posts: 1,007
Likes: 1
From: NOVA, usa
Re: Neuspeed rear sway bar owners...pictures of yours bolted up (ef4dr)
Before putting this bar in I was runnin the stock Si bar and 2.5" exhaust, it still rubbed the sway bar. The constant noise was anoying but I got over it.
It depends on what exhaust your running; but, your best bet is to go to a good muffler shop and have em bend a new upsidedown U to fit. I'll let you know if my new set up rubs, the way things are lookin I'll have to repaint the bar every week to keep it from rusting from constant rubbing
It depends on what exhaust your running; but, your best bet is to go to a good muffler shop and have em bend a new upsidedown U to fit. I'll let you know if my new set up rubs, the way things are lookin I'll have to repaint the bar every week to keep it from rusting from constant rubbing
Thread
Thread Starter
Forum
Replies
Last Post
moridin2004
Honda CRX / EF Civic (1988 - 1991)
8
Jan 10, 2003 01:44 PM
