I want to know if its possible to put S2K seats in an integgra?

 

sure, its possible. custume brakets will make almost any seat fit. I had a friend put celica seats in his tacoma. But to your problem, i've read that you only need to bend a few tabs on the braket. But don't quote me, if you haven't tried, do a search to see if i'm correct.

 

Looks like it, I think that's a Civic though but it works.


[Modified by SurferX, 12:10 AM 6/4/2002]

 

sweeeeeeeet

 

It wont' fit perfect, but with a little imagination it will look tiiite.
EVIL

 

"yeah i just got the s2integra!! new special edition integra"

hehe, i cant wait for some guy to tell me this

 

It is very possible a friend of mine put some in his 2001 GSR, all he said he had to do was make custom brackets also the seats don't move back and forth they stay as custom to his fitting.

GEN2TEG

 

I need instructions on how to make the S2K seats. I may be geting some very soon!

 

LOL My friend put GSR seats in her Tacoma...hHahHa

 

possible, my friend had s2k seats in his EG,k pretty nice, he ha dto make custom brackets for i t.

 

Yea I had a friend who put S2000 seats in his EG hatch. I think he just used the brackets, but the seats sat too low so he used school books to prop them up.

 

crazybovine from this board has them in his gsr.

 

Do the S2000 Seats end up sitting lower than the Integra seats???? Or are they about the same height??

 

Here are the pictures.

The front brackets of the S2000 seats are layed horizontal with the floor board of the S2000 chassis. Since we all know EG and DC2 have a mounting beam that lays diagonal, you just have to bend it with a mallet. Give it one or two good thumps.





The rear brackets had to require drilling a hole through the chassis. I put one steel reinforcement plate underneath the chassis to prevent tear out in case of a wreck.



The finished product.

 

nice.. how much did they cost? And do these recline and slide back and forth?

 

oh my god...that is so tight.

how much for the seats? I just put leather in and was all happy, but man do those ever look amazing!! Very clean!

Nice job!
-Rage

 

ive got s2k seats...........im me if you want them

 

i think jonas is still selling some talk to him about the seats

 

Personally, i think this is retarded~~ i am sorry guys..... but why?
to make yourself look cooler huh?

i just dont' get the point.... it's pointless to my view yo....
but dont quote me on this..... it's your teggy... you can do whatever you like to it...
Enjoy

 

You can probably change the stock brackets from your stock seats and put them onto the S2k seats. It would be a direct bolt in after that.

 

damn ,.tha's looks crazy,...

 

because they look cool
plus they have better shoulder support then our stock seats.

 

Nighthawk GS-R how much u selling them?

 

I got them in my 00 teg. Crazy bovine kept the sliders stock and just drilled holes. I took my seats to a welder and he cut the rear mounts to fit my stock holes(about $100). Yes they do slide back and forth but they are very stiff to slide.

My only problem is getting out of the car cause they sit very very low. Also its kinda hard to see everything over the dash and i'm 6'. Otherwise better than spending $1600 on sparco torinos with mounting brakets.

JJ

 

6' and having a hard time seeing over the dash? Are you leaning stunna style? Im 5'8" and I can see just fine.