SOLD to strictly.business good people


1991 Honda Civic SI Hatchback

B16a with the following;
CTR pistons .20 over
CTR cams, valve springs, and retainers
ITR lost motion assembly
ITR oil pump
ITR water pump
ITR intake manifold
GSR fuel rail
OEM ALL NEW; bearings, valve seals, valve guides, head bolts, thermostat, hoses, gaskets, seals, top to bottom
Skunk2 cam gears
Clutchmasters 7.5 lbs flywheel
ACT street disc & extreme presssure plate
APEXi VAFC
Autometer A/F guage
Mugen program PR3
Spoon headgasket
DC 4-2-1 header
2.25 in exhaust punched out cat
Hasport mount kit
J1 tranny no grinds
Motor has less than 3,000 miles since build
Chassis 134,xxx

Valve job
Resurfaced head
Balanced bottom end
Micro polished crank

JDM front end
HX rims
Full interior minus carpet

Extras included;
A/C system
SI exhaust with new high flow cat
SI front end

VIN 2HGED7369MH565806
Vehicle is a stolen and recovered salvage title. I bought the car off my friend once the police recovered it. All repairs and salvage cert where done by me. The car was not wrecked! All I had to replace was the windshield, side window, battery, distributor, wires, some fuses and fluids. Carpet was pulled due to broken window and water intrusion making carpet smell. The car was never ran. I was going to get it tuned but lossed interest. Thanks for looking!

3,500











Modified by MisterB at 6:54 AM 4/22/2007

 

looks clean im looking for a EF but thats out of my price range, good luck on sale.

 

that isn't a ctr swap. ctr block has the same deck height as an LS. CTR has a different r/s ratio.

 

pmed.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by UNKNOWN_MEMBER &raquo;</TD></TR><TR><TD CLASS="quote">that isn't a ctr swap. ctr block has the same deck height as an LS. CTR has a different r/s ratio. </TD></TR></TABLE>

okay how about calling it a "poor mans ctr swap"

I am too poor for the real ctr!

 

pmed replied.

 

3500 with that motor setup is a pretty sweet deal.

 

theres around 3k on the motor but you say its never been ran? did you buy the motor built? im confused.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by strictly.business &raquo;</TD></TR><TR><TD CLASS="quote">theres around 3k on the motor but you say its never been ran? did you buy the motor built? im confused.</TD></TR></TABLE>

Sorry, let me clarify. I built the motor and did the swap. I did not do the machine work. Left that to the pros. I have well over 3k into the motor alone. I never raced the car or abused it. It has just been putted around town. I also have references on this site to varify all the info is correct!

 

Updated pics: Some people asked about the interior and flywheel.

Issues: I took the car out today and noticed a few issues I want to mention;
1) Car is not smogged. Registration is paid but the car will need to be smogged
2) Just got a CEL 21 vtec solenoid
3) Passenger keyhole has a screw in it. Damaged from thieves.
4) Windshield trim used was generic and leaked so I used a bit of electric tape

 

Bump.. Seen car on CL and like it but outa of my price range for and ED

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 143MYVTECEF &raquo;</TD></TR><TR><TD CLASS="quote">Bump.. Seen car on CL and like it but outa of my price range for and ED</TD></TR></TABLE>

Thanks

 

 

i would buy this in a second if you were NY bump

 

do you have paper work for swap? what part of socal?

 

nice civ ,pmed was the original color black?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by teamols &raquo;</TD></TR><TR><TD CLASS="quote">nice civ ,pmed was the original color black?</TD></TR></TABLE>

Did not get pm.

Yes, the original color was black. Door jams, engine bay,trunk, interior still black.

I do have some paperwork on the parts but I did the work myself, minus machine work.